Horizontální obráběcí centrum MAZAK FH 5800

Capacity: 

Maximum workpiece diameter: 730 mm 

Maximum workpiece height: 710 mm 

X-axis travel 710 mm

 Y-axis travel: 610 mm 

Z-axis travel: 660 mm 

Distance from the spindle end to the pallet center: Min. 150 mm-Max. 810 mm 

Distance from the spindle center to the pallet top: Min. 50 mm-Max. 660 mm 

Pallet load capacity (uniformely distributed): 500 kg 

Spindle: 

Spindle taper hole: 7/24 taper N °40 

Spindle speed: 35-12000min-1 (35-12000 rpm) 

Spindle speed shifts: 2 (electric) 

Spindle bearing ID: 80 mm 

Main motor: 

15 min. rating: 22 kw 

Continuous rating: 15 kw 

Feed rate: 

Rapid traverse: 50000 mm/min 

Cutting feed rate: 1-50000 mm/min

Table & pallet: 

Pallet dimension: 500x500 mm 

ATC Tool magazine:

number of tool pockets: Standard 40 

Tool selection method: Automatic random and shortest access to the magazine pocket number 

Tool shank: IS BT 40 

Diameter of max. tool: 

Unconditional: 95 mm 

Without adjacent tools: 150 mm 

Tool's max. length from taper reference place: 360 mm 

Tool's max. weight including the tool holder and pull stud: 12 kg 

Tank capacity: Lubricant tank capacity: 3 l x 2 

Spindle coolant tank capacity: 50 l

Coolant tank capacity: 500 l 

Machine dimensions: 

Height from floor top: 2648 mm 

Width: 2750 mm 

Length: 4435 mm 

Machine weight (standard): 10 200 kg 

Power: 

Voltage 3 phases 

Pressure: 0,5 to 0,9 MPa 

Capacity (standard) : 440N/min (ANR)