VÄRNAMO - EV-5 - Various milling machines - 1970
- Lot:
- A7-29811-12
- Texing, AT
Collection by appointment
- Current bid
- Status
Activate Auto-bid
Recommended
About this lot
Pick-up possible in the following period:
27.02.2025 from 09.00 to
16.00
Unfortunately, exact data is not available due to the age of the machine. Guidelines as follows: Working width: Typically between 300 mm and 500 mm, depending on the machine. Planing depth: Adjustable, usually up to 5 mm in one pass. Drive power: Usually between 3 kW and 5 kW, depending on the model. Power supply: 380 V / 50 Hz (three-phase current), which is typical for machines of this era. Planing shaft diameter: Could be in the range of 70mm to 100mm. Plough shaft speed: Typically between 4000 and 6000 rpm. Condition: unchecked
27.02.2025 from 09.00 to
16.00
Unfortunately, exact data is not available due to the age of the machine. Guidelines as follows: Working width: Typically between 300 mm and 500 mm, depending on the machine. Planing depth: Adjustable, usually up to 5 mm in one pass. Drive power: Usually between 3 kW and 5 kW, depending on the model. Power supply: 380 V / 50 Hz (three-phase current), which is typical for machines of this era. Planing shaft diameter: Could be in the range of 70mm to 100mm. Plough shaft speed: Typically between 4000 and 6000 rpm. Condition: unchecked
- Lot number:
- A7-29811-12
- Location:
- Texing, AT
- Sold by:
- Commercial Seller
Lot specifications
- Quantity
- 1
- Margin
- No
- Brand
- VÄRNAMO
- Type
- EV-5
- Year of build
- 1970
- Serial number
- 10105
- Engine power (kW)
- 3 - 5 kW
- Machine weight
- 1460kg
- Dimension l
- 2100mm
- Dimension w
- 700mm
Documents
Attention please!
All items are sold as used and uninspected unless otherwise noted.
Please refer to the item description.
For more detailed information on guarantee and warranty, please refer to the auction conditions.
