Extraction systems (wood)

26
Buy used extraction systems for wood chips & dust at auction
Categories
Reset filters Show items
Show on map view
LYSAIR LDF-TK-01 Dust Filter System
shape
CORAL CA / 2C Dust Filter
shape
Belgium, 9870 Zulte
CORAL CA / 2C Dust Filter
SIA Chip Extractor
shape
Italy, 14100 San Giuseppe (AT)
SIA Chip Extractor
ESTA DUSTEX F-189 ATEX 66618905011 Extraction Unit
shape
SCHÜKO Validus Extraction system (wood)
shape
Play
Germany, 25368 Kiebitzreihe
SCHÜKO Validus Extraction system (wood)
ALKO FMRG 1/160 Extraction system
shape
Germany / Nordrhein-Westfalen
ALKO FMRG 1/160 Extraction system
ACWORD ACVIRO FT 404 Chip Extractor
shape
KEMPER 82100106 Extraction system - cartridge filters
shape
SCHUKO Paint-Max paint mist extraction wall
shape
AL-KO FURG Central chip extraction system
shape
Germany, 76744 Maximiliansau
AL-KO FURG Central chip extraction system
HOLZKRAFT ASA 51 Stationary raw air extraction system
shape
HOLZKRAFT ASA 1903 extraction unit
shape
Austria, 2700 Wiener Neustadt
HOLZKRAFT ASA 1903 extraction unit
HOLZKRAFT KSA 2403 raw air extraction system
shape
HOLZKRAFT ASA 2403 raw air extraction system
shape
BARTLING Vacuum Generator fan
shape
Spain, 28890 Loeches - Madrid
BARTLING Vacuum Generator fan
WORKERS WB UFO-101 ASA chip extraction system
shape
HÖCKER POLYTECHNIK Suction system
shape
Germany, 42719 Solingen
HÖCKER POLYTECHNIK Suction system
HARRY EUROPEEN One-Bag Dust Collector
shape
Spain, 28890 Loeches - Madrid
HARRY EUROPEEN One-Bag Dust Collector
HÖCKER POLYTECHNIK Mobile extraction system
shape
EUROVENTILATORI APE712/A Suction motor
shape
Italy, 14100 San Giuseppe (AT)
EUROVENTILATORI APE712/A Suction motor
HOLZKRAFT ASA 2403 Mobile extraction system
shape
URBAN U-2000 Mobile extraction system
shape
SCHUKO Mobile extraction unit
shape
Germany, 49757 Werlte
SCHUKO Mobile extraction unit
METABO AG 2417 Chip extraction
shape
Germany, 42719 Solingen
METABO AG 2417 Chip extraction
SCHUKO VALIDUS A-160-2330/30/249/BD Filtration System
shape
Exhaust and filtration installation
shape
Romania, 021806 Bucharest
Exhaust and filtration installation
Extraction systems are security components used in areas containing dust, aerosols or gaseous emissions. An extraction system ensures that these pollutants are filtered and properly disposed of, so that they do not find their way into the environment.
  • They are security components
  • It ensures that these pollutants are filtered
  • It contains an intake trumpet attached to a long pipe.
 Quality   Great offers   Personalized

An extraction system contains an intake trumpet attached to a long pipe. At the end of the pipe there is a filter, behind which there is a suction unit (for example, a ventilator). Even though the length of the pipe can reduce the effectiveness of the suction, a certain amount of distance between the filter and the emissions source is usually unavoidable. The resulting hot gases sufficiently cool off on their way to the suction unit, in order to avoid causing any damages to the filter. This also allows for an extraction system to have several intake trumpets that are all connected to one extraction unit.

Extraction systems are used in areas where production processes release dust or gasses that are a health or environmental hazard. They are a standard component for metal grinding machines, woodworking machines, plastic or chemical production and exhausts for combustion engines. During all types of thermal cutting or the combining of metals, for example, the soldering or plasma cutting of metals, gaseous emissions are an extreme health hazard. Therefore, it is particularly important that there is a continual extraction system in place. This is also the case for all types of metal coating, especially galvanised steel.

Before setting up an extraction system, it is important to ensure that the suction and filtering capacity is enough for the specific requirements of the process. Before buying an extraction system, it is normally obligatory to have a comprehensive consultation. It is important that the extraction system is constantly used; during manual work it is often ignored or forgotten about. The maintenance of an extraction machine is usually the responsibility of the manufacturer, and should only be done by a qualified professional. A particularly high concentration of noxious substances accumulate in the filters of extraction systems. Therefore, when replacing the filter, it is important to wear special protective gear. The disposal of the filter has to be professionally executed, often times by trained environmental specialists. Manufacturers of extraction systems usually provide a good service, comprehensive consultations and have contacts to special companies that deal with the maintenance and disposal of the filters.

Extraction systems come in countless sizes. The largest difference between the varying extraction systems is the choice between a stationary or mobile design. The stationary systems are an architectural feature of the production process and require an incredible amount of effort to install. Mobile systems are built on wheels and about the size of refrigerators. They can be moved when needed and only require access to electricity to start running.

Well-known manufacturers of stationary extraction systems are: RUWAC, VAUPEL, KAWEHA and PRINZ.