GDW LZ 360 S Lathe

Machine number: 05375
Operating voltage: 400 V
Frequency: 50 Hz
Center height: 175 mm
Rotation diameter over bed: 355 mm
Rotation diameter over cross slide: 195 mm
Center width between centers: 800 mm
Turning length: 750 mm
Bed width: 260 mm
Turning spindle:
Spindle diameter in the front bearings: 70 mm
Spindle bore: 43 mm
Inner taper metric 50
Centering taper: MK 3
Chuck diameter manual chuck normal: 160 mm
Chuck diameter manual chuck: max. 200 mm
Power chuck: 160 mm
Face and clamping disk diameter: max. 300 mm
Tool slide:
Guide length in the bed slide: 365 mm
Scale division on the lock case handwheel: 0.1 mm
One turn of the lock box handwheel: 25 mm
Face slide travel: 185 mm
Facing spindle pitch: 4 mm
Width of the facing slide: 140 mm
Top slide travel: 115 mm
Top slide spindle pitch: 3 mm
Scale graduation on the top slide spindle: 0.05 mm
Top slide width: 125 mm
Swivel range of the top slide: +90/-65°
Distance between chisel rest and tip line: 34 mm
Shank height in Multifix B: max. 20 mm
Tailstock with handwheel
Quill stroke: 110 mm
Diameter of the quill: 50 mm
Mounting taper: MK 3
Scale graduation on the quill: 1 mm
Adjustment spindle pitch: 4 mm
Scale graduation on the tailstock spindle: 0.05 mm
Cross adjustment: +/- 10 mm
Speed range: 150 - 3000 rpm
Number of feeds: 2 x 24
Nominal values: 0.025 - 0.5 mm
Maximum workpiece mass between centers: 160 kg
Maximum workpiece mass on the fly including clamping device: 100 kg
Incl. two-axis digital readout from the manufacturer GDW