MAZAK FJV-60/120 VERTICAL MACHINING CENTER

Capacity: 

Table working surface: 1250x3000 mm 

Table longitudinal travel X-axis: 3200 mm 

Spindle head cross travel Y-axis: 1400 mm 

Spindle head vertical travel Z-axis: 585 mm 

Spindle nose to table top surface: min. 200 mm - max. 785 mm 

Distance between columns (inside of columns): 1480 mm 

Max. load on table; 5000 kg 

Max. drilling capacity (for S45C): Ø 50 mm 

Max. tapping capacty (for S45C): M45 x P4.0 

Max. milling capacity (for S45C): 360 cm3xmin 

Spindle: 

Spindle head vertical Z-axis: 585 mm 

Spindle nose: ISO No. 50 

Spindle speed 

Standard min-1: 22-6000 (Command by 4-digit S-code number in 1 min-1 increments) 

Spindle motor: AC inverter motor, 30 min. rating : 26, Cont. rating: 22 

Table: Table size: 1250x3000 mm 

T-slot: Size (ISOR299): 22 mm 

number of T-slots: 9 

Pitch: 140 mm 

Reference slot (center slot): 22H8 +0,0033/0 

Max. load on table(load uniformly distributed): 49 kg 

Table height from machine bottom: 850 mm 

ATC: 

Tool storage capacity: 60 

Tool selection: Coded magazine pocket random selection by shortest path 

Tool shank type: MAS BT-50 

Max. tool diameter(with adjacent tools removed) : Ø125 (Ø210) mm 

Max. tool mass (incl. shank and retention knob): 20 kg 

Total tool mass: 330 kg 

Max. tool length (incl. shank and retention knob): 507 mm 

Tool change time (on chip- to-chip basis): 9,8 (MAS) s 

Acuracy: 

Uni-directional postioning (using stored pitch error compensation): X-, Y-axis: +/- 0,0025/1000, Z-Axis: +/- 0,0025/full travel 

Uni-directional repeatability X-, Y-, Z-axis: 0,001 mm 

Machine dimension: 

Machine height from machine bottom: 3526 mm 

Floor space (without chip conveyor): 4101x8100 mm 

Machine mass: 27000 kg 

Required power: Electricity: Voltage 200/220 +/- 10%, 3-phase 

Frequency: 50/60 +/- 1 

Power supply (26 kw) (Standard): 55,4 (Cont. rating), 59,4 (30 min. rating) 

Primary service cable: 80mm² 

Earth cable: 38mm² 

Air source: Air pressure 0,5 MPa 

Air capacity: 650 l/min (ANR) 

Noise during cutting: Average sound pressure level at operator's position (varies depending on options): 80 or less dBA