MAZAK VORTEX 1400/160-II VERTICAL MACHINING CENTER

Capacity: 

Table travel (right and level) X-axis: 4200 mm 

Column travel (back and forth) Y-axis: 1400 mm

Spindle head travel (up and down); Z-axis: 610 mm 

Spindle head tilting travel (banck and forth) a-axis: +/- 40° 

Spindle head tilting travel (right and left) B-xis: +/- 40° 

Distance from the spindle end to the table top: min. 200 mm-max. 810 mm 

Spindle head travel Z-axis: 610 mm 

Spindle taper hole: 7/24 taper No. 50 

Spindle speed 

Standard: 50 - 10000 min-1 5 Digit S code direct command for 1 min-1 

Spindle torque 

Standard (30 min): 117,7 nm 

Spindle motor: Type: AC inverter motor

Output: 30 min. rating: 37 kw Cont. rating: 30 kw 

Table: 

External size of the table: 4000 mm (right and left) x 1250 mm (back and forth) 

T-slots : Nominal size (ISO R 299) 22 mm 

number of slots: 9 

Pitch: 140 mm 

Reference T slot: 22H8 mm 

Max. table load capacity when equally distributed: 7000 kg 

Automatic tool changer: 

Magazine capacity: 60 tools 

Tool selection method: Automatic random and shortest access to the magazine pocket number 

Tool shank: MAS-50 & CAT-50 

Diameter of maximum tool: 

- with adjacent tool: Ø 125 mm 

- without adjacent tool: Ø 210 mm 

Tool's maximum mass incl. the tool shank and retention knob : 20 kg 

Tool's maximum length from taper gage face: 380 mm 

Max. allowable moment of magazine & ATC arm gripper: 16 N m 

Chip- to-chip time (MAS -011-1987): 9,8s 

Tool- to-tool time: 1,5 s 

Static accuracy (actually measured exp): 

Bidirectional positioning accuracy X-/Y-/Z- axis: 0,030/0,020/0,012 mm a-/B-axis: 14 s 

Bidirectional positioning repeatbility X-/Y-/Z- axis: 0,018/0,010/0,007 mm a-/B-axis: 8 s 

Machine size: 

Machine height from machine bottom Standard: 4058 mm 

Floor requirements: 11880 x4612 mm 

Machine mass: 37 000 kg 

Power: AC Voltage: 200/220/230/460 v +/- 10% 

Frequency: 50/60 Hz +/- 1% 

Pneumatic: 

Pressure: 0,5 MPa or over 

Capacity : Standard: 600 l/min (ANR) or over 

- With cutting air-blaster and pallet changer: 1500 l/min (ANR) or over 

Noise value : Lwa :79dBA 

Uncertain value: K : 4 dBA