Autre industrie SCANTECH XT 30
En vedette
lot num. 806
9 500 €
1 observateur
Inscrivez-vous pour faire une offre
€
Fixer l'agent d'enchères
plus frais d’enchère et TVA
21/01/2025 14h04
Heure de fin
9 500 €
Offre de départ
Détails de l'article
- Nom
- Autre industrie SCANTECH XT 30
- Article n°
- 980017
- Fabricant
- SCANTECH
- Modèle / Type
- XT 30
- Documents
- 6U_Server_Rack_layout.pdf GENERAL_LAYOUT_ULO3-2500.pdf Bahnriss_Schluesselschalter.pdf CE_Declaration_of_conformity_de_STDE190001.pdf Flexscan_userguide_V2.2.1_de.pdf opc-ua_export_v1.0.pdf serverrack_datasheet.pdf ST00025-Installation_Guide_ULO3_rev_1.2_de.pdf ST00033-ULO3_Maintenance_Manual_rev_1.0_de.pdf ULO3_Electrical_drawing_A.9.pdf
- Année de fabrication
- 2020
- Article disponible à partir de
- immediately
- Qualité de l'article
- Lieu
-
Allemagne, 79379 Müllheim i.M.
- Afficher sur la carte
- Tous les articles à ce lieu
Coûts et avantages
- 19 %
- 500,00 €
- Prix total
- plus TVA
- Frais d’envoi
- non inclus
- Conditions de livraison
- FCA Müllheim i.M., chargée sur camion
- Conditions de paiement
- 100% du paiement avant la collecte
Détails techniques
- Dimensions d'installation approximatives (LxlxH)
- 3.212 x 290 x 892 mm
- Poids approx.
- 400 Kg
Description de l'article
Measuring device for determining the thickness of flowing goods - measuring head traverses across the web.
The system is configured so that the web width (knife position) is read in via sensors. Further signals for process control can be transferred via the I/O box.
Settings for PVC film in the calendering process with thicknesses of 60µm - 1000µm, but can also be used for other materials.
The specific application should be clarified with the manufacturer Scantech, as well as support during commissioning of the system.
Scanner
The parts could also be used individually as spare parts storage.
The system must be approved by the authorities, and an independent inspection must also be carried out by an X-ray expert before official commissioning.
One (or two) employees must be trained as radiation protection officers in accordance with specialist knowledge R3 (within Germany).
The system is configured so that the web width (knife position) is read in via sensors. Further signals for process control can be transferred via the I/O box.
Settings for PVC film in the calendering process with thicknesses of 60µm - 1000µm, but can also be used for other materials.
The specific application should be clarified with the manufacturer Scantech, as well as support during commissioning of the system.
- Thickness gauge ULO3-2500, orientation Left-B
- Flexscan 6 software
- Operator interface
- Server rack with replacement server and UPS
- Communication interface OPC-UA
- Supply voltage: 230V +/- 10%, 50Hz +/- 1%, 20 A, loadable neutral conductor
- Electrical design: in accordance with VDE 100 with declaration of incorporation
- Documentation: 2 x paper
- Documentation language: 2 x German
- Material: PVC foil
- Thickness: 50µm to 1000µm
- Web width: Max. 2100mm
- Web speed: max. 200 m/min
- Line type: PVC calender
- Product tolerance: +/- 5% at 60µm, +/- 3µm
- Measuring accuracy: +/- 0.3µm at 60µm
- Temperatures:
- Measuring point, sensor: < 45°C
- Operating station: < 45°C
Scanner
- Measuring frame ULO3 - 2500 mm
- X-Ray sensor greater than 5keV acceleration voltage, max. 15keV
- DELL PC (without mouse, screen and keyboard)
- 1 EATON UPS for bridging power failures
- 2 server PCs to be able to continue using the other in the event of a failure
- 1 switch
- 4x analog input (2x for your measurement position (4-20mA or 0-10V))
- 4x Analog Output (statistical variables or mean values can be transmitted here via analog signal) (4-20mA or 0-10V)
- 8x digital input (e.g. buttons that trigger actions on the scanner can be connected here. E.g. Start Scan, Stop Scan...)
- 4x digital output (e.g. to control a lamp / horn if, for example, the average value is outside a tolerance)
- 1x rotary encoder (necessary for operation)
- 3x draw-wire sensor for transferring the material width (optional)
- 1x key/switch for bypassing a barrier sensor for maintenance purposes
The parts could also be used individually as spare parts storage.
The system must be approved by the authorities, and an independent inspection must also be carried out by an X-ray expert before official commissioning.
One (or two) employees must be trained as radiation protection officers in accordance with specialist knowledge R3 (within Germany).
Traduction automatique
Détails de la vente aux enchères
- Nom de l’enchère
- Large choix à des prix équitables : assainissement des stocks pour l'usinage du bois
- lot num.
- 806
- Documents
- Conditions spécifiques de l'enchère
- Visite
-
Le lieu exact est communiqué sur demande
Les articles sont à différents emplacements (consultez leur description). Visite uniquement sur rendez-vous !
Nos services
- Service personnalisé en 16 langues
- Conseil sur place & par des experts
- Organisation du transport si nécessaire
- Assistance pour les papiers & les formalités douanières