Priechodná vŕtačka BIESSE TECHNO FDT

 CONTROL SYSTEM 
• Electronic Control NC 400 
TECHNICAL CHARACTERISTICS 
• Panel length min-max 205 - 3.200 mm 
• Panel width min-max 120 - 1.200 mm 
• Drilling area in Y 120 - 608 mm 
• Boring center to center distance between vertical units in ""X"" min 96 mm 
• Advancement speed for continuous speed adjustment from 35 - 75 m/min – Digital inverter 
DRILLING SYSTEM 
• Nr. 2 Horizontal units with electronic drive, each one complete of nr. 2 boring chucks with nr. 11 spindles – Motors power 1,5 Hp each 
• Nr. 4 Bottom vertical units (width 96 mm) with pneumatic drive, each one complete of nr. 2 boring chucks with spindles with quick coupling device - Motors power 2,3 Hp each 
• Nr. 2 Top vertical units (width 96 mm) with pneumatic drive, each one complete of nr. 2 boring chucks with spindles with quick coupling device - Motors power 2,3 Hp each 
• Nr. 4 Manual double flip-open top pressure units with fall protection 
• Automatic system to out-put the wood wastes (chips) 
• Two section conveyors complete with in-feed flip-open conveyor (670 mm)/out-feed flip-open conveyor (315 mm) 
• Single-belt central transport – Support for mounting on a bottom vertical unit 
• Device for feeding heavy panels 
CONTROLLED AXES 
• Nr. 2 (1 + 1) Modules for positioning the Rh horizontal unit and pair of rear backstops 
• Nr. 2 (1 + 1) Modules for positioning the two transport along ""X"" axis 
NORM AND OPTIONAL FOR THE SECURITY 
• CE marks 
• Fixed side panels and barriers of photocells