Pásová brúska KUHLMEYER LBS 2.10 - 8000
Podrobnosť stroja
- Názov
- Pásová brúska KUHLMEYER LBS 2.10 - 8000
- Číslo výrobku
- 938498
- Výrobca
- KUHLMEYER
- Model / typ
- LBS 2.10 - 8000
- Dokumenty
- AB_Kuhlmeyer_LBS1.pdf Layout.pdf
- Video
-
Video 1 - Rok výroby
- 2018
- Položka je k dispozícii od
- immediately
- Stav položky
- dobrý, pod prúdom
- Miesto
-
Nemecko, 41747 Viersen
- Zobraziť na mape
- Všetky položky na tomto mieste
Náklady a služby
- Náklady na dopravu
- neobsahuje
- Podmienky doručenia
- EXW Viersen, špeciálne zakladanie, nezabalené
- Platobné podmienky
- vyplatenie plnej sumy pred vyzdvihnutím
Technické údaje
- sériové číslo
- 180710/1
- dĺžka stola
- 8,000 mm
- hĺbka stola
- 3,000 mm
- rozmery brúsneho pásu
- 160 x 9400 mm
- približné rozmery zostavy (d x š x v)
- 15,000 x 5,850 x 3,400 mm
- Približná hmotnosť
- 2,500 kg
Popis položky
The young KUHLMEYER Long Belt Grinding Machine is a powerful solution for automatic surface grinding of large metal sheets and weld seams. With a table length of 8 metres and 120 operating hours, it offers efficiency and precision.
In 2019, the machine was supplemented with a barely used ULMATEC Suction Unit.
Serial number and Type of the Long Belt Grinding Machine
Control system
Software
ULMATEC extraction system from 2019
In 2019, the machine was supplemented with a barely used ULMATEC Suction Unit.
Serial number and Type of the Long Belt Grinding Machine
- Serial number: 180710/1
- Type: LBS 2.10 - 8000
- Machine table length: 8.000 mm (could be extended as required)
- Machine table width: 3.000 mm
- Travelling rail length approx.: 14.200 mm (could be extended as required)
- Grinding head stroke approx.: 80 mm (currently 45 mm above table edge → 35 mm below table edge)
- Installed grinding belt dimensions: 160 x 9.400 mm
Control system
- PLC control: SIEMENS Simatic S7
Software
- Grinding belt speed
- Contact roller speed
- Grinding pressures
- Insertion and removal control
- Grinding time start and end of workpiece
- Grinding belt drive unit frequency-controlled: 15 kW
- Grinding belt speed: 15 - 38 m/s
ULMATEC extraction system from 2019
- Travelling extraction via a suction slot channel
- Pre-separator
- SCHUKO rotary valve type: ZRS 09.430 x 270 mm
- Fire protection system and spark detection
- Swivelling control console + radio remote control
- Moulded guide tracks
- Spare rollers with ball bearings and various sanding belts
- Additional sanding belts can be purchased for a fee after an inspection
- 120 operating hours read off
Automatický preklad
Priamy predaj
1 sledujúci
1
Pozorovateľ
na vyžiadanie
Cena
Naše služby
- Služba demontáže a opätovnej montáže
- Celosvetová logistická sieť
- Individuálne poradenstvo
- Podpora pri vybavovaní dokladov a colnom konaní