Ekstraksiyon Ünitesi ve Tünel Kurutucu GIARDINA ALBATROS GST 1401/3

The Albatros system cures lacquer by means of the UV system, eliminating the IR component from the radiating process, i.e. it stops the undesired heat normally issued during the curing phase, only allowing the UV rays required for the polymerizing process to pass. 
Unlike other existing systems that block both the heat and part of the UV energy, this one does not need more powerful lamps to compensate polymerizing losses, thus saving 50% of the electric energy. After IR filtration, an 80 W/cm lamp therefore gives an identical efficiency in the UV field as a lamp without filtration. Thus there is no need to install a 120 W/cm lamp to achieve an 80 W/cm efficiency. - This method is useful since it does not raise the temperature of the panel when it passes under various UV tunnels before sanding processes, and in case of high gloss finish it prevents the lacquer from being subjected to head shock. 
Equipped with: 3 lamps Giardina; Control panel. 
Voltage: 400V; 50 Hz; 74kW
Missing electrical cabinet Çeviriyi göster