TIH 210M SKF Induction Heater

The TIH 210m is capable of heating a 210 kg bearing in just 20 minutes. The induction coil is located outside the housing of the heater, the same concept as the TIH 240, which allows the bearing to be placed around the coil. This results in a reduction in heating time and power consumption by up to 30% and a reduction in heating costs of up to 50% compared to similar heaters. The total weight of the TIH 210m is 75 kg including the two yokes that come standard with the heater. The yokes can be stored in the housing of the heater, reducing the risk of damage or loss of the yokes. The smaller yoke is used to heat smaller bearings with lower power consumption. The cross-section of the coil core is 70 x 70 mm. The TIH 210m is equipped with a 4-stage power reduction that ranges from 20 to 80%.