Lead and pull spindle lathe
- Lote:
- A7-28757-80
- Kirchheim Teck, DE
Recogida mediante cita previa
- Puja actual
- Estado
Activar la puja automática
Recomendado
Sobre este lote
Machine number: 685010990006
Operating voltage: 400 V
Frequency: 50 Hz
Rated current: 18 A
Connection: 9 kVA
Circumferential diameter over bed: 505 mm
Circumferential diameter above the support: 270 mm
Circumferential diameter in the bed offset: 700 mm
Tip length: 1000 mm
Turning length: 970 mm
Tip spacing: 970 mm
Width of the offset: 230 mm
Spindle nose size: 8
Spindle bore: 77 mm
Spindle Hollow Cone: Metric 90
Maximum torque: 50 Nm
Speed: 1450 rpm
Tailstock:
Tailstock quill: 70 mm
Working movement of the quill: 180 mm
Inner cone of the tailstock quill: Morse 5
Tailstock Convertibility in transverse direction: +/- 12 mm
Support:
Working stroke of the cross slide: 140 mm
Number of secured positions of the turret: 8
The machine is equipped with a tailstock, a Multifix steel holder and a three-jaw chuck
Diameter: 300 mm
Incl. 2 steady rests and a face plate
Diameter: 500 mm
Operating voltage: 400 V
Frequency: 50 Hz
Rated current: 18 A
Connection: 9 kVA
Circumferential diameter over bed: 505 mm
Circumferential diameter above the support: 270 mm
Circumferential diameter in the bed offset: 700 mm
Tip length: 1000 mm
Turning length: 970 mm
Tip spacing: 970 mm
Width of the offset: 230 mm
Spindle nose size: 8
Spindle bore: 77 mm
Spindle Hollow Cone: Metric 90
Maximum torque: 50 Nm
Speed: 1450 rpm
Tailstock:
Tailstock quill: 70 mm
Working movement of the quill: 180 mm
Inner cone of the tailstock quill: Morse 5
Tailstock Convertibility in transverse direction: +/- 12 mm
Support:
Working stroke of the cross slide: 140 mm
Number of secured positions of the turret: 8
The machine is equipped with a tailstock, a Multifix steel holder and a three-jaw chuck
Diameter: 300 mm
Incl. 2 steady rests and a face plate
Diameter: 500 mm
- Número de lote:
- A7-28757-80
- Ubicación:
- Kirchheim Teck, DE
- Vendido por:
- Vendedor de empresa
Especificaciones del lote
- Cantidad
- 1
- Margen
- No
- Marca
- TOS TRENS
- Tipo
- SN 500 S/1000
- Peso de la máquina
- 2000kg
- Dimensión l
- 2600mm
- Dimensión w
- 1000mm
- Dimensión h
- 1500mm
- Condiciones de entrega
- Cargado en camión
Documentos
¡Atención!
Recogida posible en el siguiente período:
06.03.2025 - 07.03.2025
10.03.2025 - 13.03.2025
Todos los artículos se venden como usados y sin inspeccionar a menos que se indique lo contrario.
Por favor, consulte la descripción del artículo.
Para obtener información más detallada sobre la garantía, consulte las condiciones de la subasta.
