Serial no. 10105 early 1970
Exact data unfortunately not available due to the age of the machine. Approximate values as follows:
Working width: Typically between 300 mm and 500 mm, depending on the machine.
Planing depth: Adjustable, normally up to 5 mm in one pass.
Drive power: Typically between 3 kW and 5 kW, depending on the model.
Power supply: 380 V / 50 Hz (three-phase current), which is typical for machines of this era. Planer shaft diameter: Could be in the range of 70 mm to 100 mm.
Planer shaft speed: Typically between 4000 and 6000 rpm.
Condition: untested Mostrar traducción