BORRIES BM 76 EL Stamping press - single column - hydraulic

Technical details: Pressure 20 KN, table surface 400 x 400 mm, projection 200 mm Stroke - continuously adjustable 40 mm, total power requirement 0.75 kW, Additional information: Settings before commissioning: Various settings must be made before commissioning the machine. Speed ​​regulation: The adjustment screw for regulating the speed is located above the power selector on the right-hand side of the machine. Turning to the right reduces the speed. Turning to the left increases the speed. The adjustment screw can be secured using the lock nut, i.e. a speed that has been selected once can be set permanently. Force regulation: The force or pressure is preselected using the handle screw on the right-hand side of the housing. Turning clockwise means more pressure, turning anti-clockwise means less pressure. The set pressure can be read off the pressure gauge (on the head of the machine). To ensure that pressure fluctuations in the air network do not affect the ram force, this should always be set slightly lower than the lowest pressure in the network. The ram force should not be set significantly higher than the workpieces require. Montrer la traduction