Centre de fraisage et de tournage CNC EMCO EMCOMILL 1200

serial number m-12918523

• Nominal voltage AC400 V, 3 phase, 50 Hz full load current 29 A
• Fuse for power line 50 A
• Nominal short circuit current 10 kA

• X-axis travel [mm] 1.200
• Y-axis travel [mm] 600
• Z-axis travel [mm] 500
• Minimum distance between shaft end and table [mm] 100
• Maximum distance between shaft end and table [mm] 600

• Length [mm] 1.300
• Width [mm] 630
• Height above ground [mm] 790
• Number of "T" channels [mm] 5
• Width of "T" channels [mm] 18
• Distance between "T" channels [mm] 125
• Maximum table load [kg] 1.500

• Speed range [rpm] 50 - 10.000
• Torque (S6) [Nm] 100
• Power (S6) [kW] 15
• With main shaft (DIN 69871) ISO 40
• Pull (ISO7388/2 Type B) ISO 7388/2
• Motor type Direct drive

• Speed range [rpm] 50 - 15.000
• Torque (S6) [Nm] 100
• Power (S6) [kW] 20
• With main shaft (DIN 69871) ISO 40
• Pull (ISO7388/2 Type B) ISO 7388/2

• Number of stations 30
• Tool change system S - arm
• Tool change time (tool - tool) [s] 2
• Maximum tool diameter [mm] 80
• Maximum tool diameter (with surrounding stations free) [mm] 125
• Maximum tool length [mm] 250
• Maximum tool weight [kg] 8
• Maximum tool magazine load [kg] 100

• Rapid traverse [m/min] 30
• Working feed [m/min] 15
• Feed force on X axis [N] 5.000
• Feed force Y-axis [N] 5.000
• Feed force in Z axis [N] 5.000

• Emulsion tank capacity [l] 300
• Cooling liquid pressure [bar] 2
• Flow rate at 2 bar [l/min] 40
• Shaft outlets 2 nozzles

• Required air pressure [bar] 6
• Required air flow [l/min] 200

• Overall height [mm] 3.000
• Ground footprint of the machine with emulsion tank (without span conveyor) [mm] 3.370 x 2.950

•  For technical details please see technical details - Centru vertical de frezare EMCOMILL 1200 Brosura and Vertical_milling_machine_EM1200-750.pdf