KNUTH Rapimill 700 HS Vertical machining centre

Machine number: 158590
Year of construction: unknown
Machine was purchased in 2014 as a demonstration machine
Control system: FANUC SERIES 0i-MB
Incl. machine vice (jaw width: approx. 105 mm), a three-jaw chuck (diameter: approx. 125 mm) and an indexable three-jaw chuck (diameter: approx. 140 mm) (dividing head)
Technical data:
Operating hours approx. 4111, see picture
Table dimensions: 770 x 300 mm
T-slots: 16 x 3 x 80 mm
Max. Table load: 120 kg
Travel distances:
X/Y/Z: 450/350/400 mm
Distance from spindle nose to table surface: from 120 - approx. 520 mm
Feed rate:
Rapid traverse X/Y/Z: 30/30/30 m/min
Cutting feed X/Y/Z: 10 m/min
Spindle speed: 15000 rpm
Spindle holder: BT 30
Max. Tool diameter: 60 mm
Max. Tool length: 100 mm
Max. Tool weight: 2 kg
For further technical data see photographed data sheet
With technical documentation as shown in the pictures
Notes: The tool holders installed in the turret are not included in the scope of delivery
The operating hours can still increase slightly.
Plexiglass pane of the door is damaged - The pane will be replaced before the machine is delivered! The operating hours may still increase slightly. Montrer la traduction