Machine de soft et post-formage STAM

Roll forming installation  configured as the following: 

Decoiler ASSERVIMENTI PRESSE

• Model SMC50C
• Serial Number: 07112331 (YOM 2011)
• Max. Width: 600 mm 
• Diameter: Ø1500
• Loading capacity: 5000 kg 
• installed power: 3.5kw
• Weight: 3000kg 

Straightener:  ASSERVIMENTI PRESSE

• Model : CRML650C 
• Serial Number: 071123332 (YOM 2011)
• Working width: 650 mm 
• Installed power:  7kw 
• Cacpacity: 07-3.5 mm (Re600N/mm2)
• Weight: 4000 kg

• Up to 25 roller sets ( 3 sections)
• Distance between axis: 665 mm 
• Diameter: 60 mm
• Max. profiled width: 485 mm extendable up to 625 mm
• Roll forming unit power 2 x 28 Kw motors
• Transmission type : cardan shaft.
• Flying mode hydraulic unit. Non stopproduction 7 parts/min ( 1500 mm length)
• Hydraulic unit to activate post-piercing and postforming units
• Average capacity : 1,6 Mio/year (1500 mm)
• Designed for profiling up to 1.5 mm 1300 Mpa mechanical strength
• Material width:  260 mm 
• For conventional 500 mpa materials it could profile 2 or 2.5 but depending on the width and geometry of the profile. 
• Total line length : 29 m.
• Line builder STAM (2012). Upgraded by GASPARINI PRO 65 (2018)
• The machine was working  until 2020 but in 2023 manufacture some pre-series and a batch of spare parts