Ponceuse à bande longue KUHLMEYER LBS 2.10 - 8000
Détails de l'article
- Nom
- Ponceuse à bande longue KUHLMEYER LBS 2.10 - 8000
- Article n°
- 938498
- Fabricant
- KUHLMEYER
- Modèle / Type
- LBS 2.10 - 8000
- Documents
- AB_Kuhlmeyer_LBS1.pdf Layout.pdf
- Vidéos
-
Vidéo 1 - Année de fabrication
- 2018
- Article disponible à partir de
- immediately
- Qualité de l'article
- bon, sous tension
- Lieu
-
Allemagne, 41747 Viersen
- Afficher sur la carte
- Tous les articles à ce lieu
Coûts et avantages
- Frais d’envoi
- non inclus
- Conditions de livraison
- EXW Viersen, départ fondations, non emballé
- Conditions de paiement
- 100% du paiement avant la collecte
Détails techniques
- numéro de série
- 180710/1
- Longueur de la table
- 8 000 mm
- profondeur de table
- 3 000 mm
- dimension de la bande de broyage
- 160 x 9400 mm
- Dimensions d'installation approximatives (LxlxH)
- 15 000 x 5 850 x 3 400 mm
- Poids approx.
- 2 500 Kg
Description de l'article
The young KUHLMEYER Long Belt Grinding Machine is a powerful solution for automatic surface grinding of large metal sheets and weld seams. With a table length of 8 metres and 120 operating hours, it offers efficiency and precision.
In 2019, the machine was supplemented with a barely used ULMATEC Suction Unit.
Serial number and Type of the Long Belt Grinding Machine
Control system
Software
ULMATEC extraction system from 2019
In 2019, the machine was supplemented with a barely used ULMATEC Suction Unit.
Serial number and Type of the Long Belt Grinding Machine
- Serial number: 180710/1
- Type: LBS 2.10 - 8000
- Machine table length: 8.000 mm (could be extended as required)
- Machine table width: 3.000 mm
- Travelling rail length approx.: 14.200 mm (could be extended as required)
- Grinding head stroke approx.: 80 mm (currently 45 mm above table edge → 35 mm below table edge)
- Installed grinding belt dimensions: 160 x 9.400 mm
Control system
- PLC control: SIEMENS Simatic S7
Software
- Grinding belt speed
- Contact roller speed
- Grinding pressures
- Insertion and removal control
- Grinding time start and end of workpiece
- Grinding belt drive unit frequency-controlled: 15 kW
- Grinding belt speed: 15 - 38 m/s
ULMATEC extraction system from 2019
- Travelling extraction via a suction slot channel
- Pre-separator
- SCHUKO rotary valve type: ZRS 09.430 x 270 mm
- Fire protection system and spark detection
- Swivelling control console + radio remote control
- Moulded guide tracks
- Spare rollers with ball bearings and various sanding belts
- Additional sanding belts can be purchased for a fee after an inspection
- 120 operating hours read off
Traduction automatique
Vente directe
1 observateur
1
Observateur
sur demande
Prix
Nos services
- Service dépose & repose
- Réseau logistique à l'échelle internationale
- Conseils personnalisés
- Assistance pour les papiers & les formalités douanières