CHIRON DZ 12 W 3-axis vertical machining center
Lot br. 2
Aukcija je završena.
Licitiranje ovog lota je završeno
Da li vas interesira ovaj artikl?
Uputite zahtjev za neobvezujuću ponudu.
Uputite zahtjev za neobvezujuću ponudu.
Pojedinosti ponude
- Naziv
- CHIRON DZ 12 W 3-axis vertical machining center
- Broj artikla
- 964791
- Proizvođač
- CHIRON
- Tip
- DZ 12 W
- Dokumenti
- Spezifikation_Chiron_339-44.pdf
- Snimke
-
Video 1 - Godina proizvodnje
- 2015
- Artikl dostupan od
- immediately
- Stanje artikla
- Lokacija
-
Njemačka, 73630 Remshalden-Grunbach
- Prikaži na karti
- Svi artikli na ovoj lokaciji
Troškovi i povlastice
- 3.000,00 €
- Troškovi prijevoza
- nisu uključeni
- Uvjeti dostave
- FCA Remshalden-Grunbach, ukrcano na kamion
- Uvjeti plaćanja
- 100% plaćanje prije preuzimanja
Tehničke pojedinosti
- radni hod po osi z
- 400 mm
- radni hod po osi x
- 550 mm
- radni hod po osi y
- 400 mm
- upravljanje
- SIEMENS CNC-Steuerung 840D solution line
- Približna masa
- 10.000 kg
- približno određivanje mjere (d x š x v)(
- 6.100 x 2.500 x 2.800 mm
Opis artikla
- Serial number: 339-44
- Operating hours: 47,253
- Belt filter system
- Chip conveyor
for optimum chip fall with center partition made of sheet steel
with 2 integrated 2-spindle dual-axis tables CHIRON CASD 280-2
- Workpiece changeover time approx. 3.5 s depending on weight
- Self-regulating thanks to self-learning speed control
Integrated on each side of the table:
NC swivel axis CRT 200 as A-axis
- Swivel angle - 10° / + 138°
- Repeat accuracy ± 5” with
- absolute, direct measuring system ECN 225
- Torque motor drive
- via backlash-free preloaded precision gears
- Very high overload capacity
- max. transmittable torque 1,200 Nm
- Speed 42 min-1
- 2 x face plate ø 245 mm
- prepared for setting up a positioning and clamping system
- Spindle distance a = 250 mm ± 0.005 mm
- Repeat accuracy ± 5” with
- absolute, direct measuring system ECN 225
- digital direct drive by torque motor
- max. transmittable torque 180 Nm
- with pneumatic clamping
- Holding torque 690 Nm
- max. transport load 75 kg per face plate
- Speed 200 min-1
- Bridge dimension 540 mm
- 4th, 5th and 6th NC axis
- smallest input step 0.0001°
- Pneumatic connection controlled for sealing air
- Pneumatic connection controlled for clamping
- Central hydraulic or pneumatic rotary feed-through
- 6-core, integrated in A- and C-axis
- water-cooled, pressurized with sealing air,
- with tool clamping monitoring
- 24.5 kW at 100% duty cycle
- 40.0 kW at 25% duty cycle
- Speed up to 15,000 min-¹
- Torque max. 45 Nm
- Speed acceleration from 0 to 15,000 min-¹
- or deceleration in 0.6 seconds
- Drilling capacity 2 x Ø 25 mm
- Thread cutting 2 x M 20
- Milling capacity 2 x 120 cm³/min
- in E335 steel
- Robust, fully encapsulated pick-up chain magazine
- with mechanical collision protection and taper cleaning
- Tool positions 2 x 32
- Tool taper HSK-A 50 DIN 69893
- Tool diameter max. 60 mm
- Tool length max. 250 mm
- Tool weight max. 3 kg
- Tool change time approx. 0.9 s (depending on control)
- Chip to chip time approx. 2.4 s (depending on control)
- Robust, fully encapsulated pick-up chain magazine
- With mechanical collision protection and taper cleaning
- Tool positions 2 x 32
- Tool taper HSK-A 50 DIN 69893
- Tool diameter max. 60 mm
- Tool length max. 250 mm
- Tool weight max. 3 kg
- Tool change time approx. 0.9 s (depending on control)
- Chip to chip time approx. 2.4 s (depending on control)
- per magazine: tool places 2x32
- Total 2 x 64 tool places
- Version in 12.4 (2 magazine shafts).
- Digital direct drives with indirect absolute path measuring systems
- Rapid traverse speed 75 - 75 - 75 m/min
(PCU 50 / NCU 730.3, 1 channel)
- incl. 10.4” TFT color screen / full keyboard / OP010S control panel
- Windows XP operating panel logic
- NC working memory 5 MB (freely available max. 3 MB)
- (freely available max. 200 programs)
- for the processing of part programs according to DIN 66025
- Hard disk with approx. 20 GB freely available
- Power display
- Operating hours and parts counter on screen
Automatski prijevod
Detalji aukcije
- Naziv aukcije
- Machines and Accessories for Metal Processing
- Lot br.
- 2
- Dokumenti
- Uvjeti i pravila ove aukcije
- Provjera stanja
-
Točna lokacija artikala na upit.
No fixed date. The items are in different locations (see item description).
Viewing by appointment only! Please contact us in advance at lqu@surplex.com for an inspection appointment.
Naše usluge
- Osobna usluga na 16 jezika
- Savjetovanje na lokaciji putem stručnjaka
- Organizacija prijevoza po potrebi
- Podrška s papirologijom i carinjenjem