CNC strug DOOSAN LYNX 2100LYSB
Top lot
Lot br. 1
49.000 €
2 Ponude 29 promatrača
Prijavite se za sudjelovanje u dražbi
€
Upotrijebi nadmetača
Provizija i PDV
11.12.2024 11:00
Zatvaranje aukcije
49.000 €
Trenutno najviša ponuda
Pojedinosti ponude
- Naziv
- CNC strug DOOSAN LYNX 2100LYSB
- Broj artikla
- 969014
- Proizvođač
- DOOSAN
- Tip
- LYNX 2100LYSB
- Godina proizvodnje
- 2022
- Artikl dostupan od
- immediately
- Stanje artikla
- Lokacija
-
Slovenija, 4221 Škofja Loka
- Prikaži na karti
- Svi artikli na ovoj lokaciji
Troškovi i povlastice
- 19 %
- 1.750,00 €
- Ukupna cijena
- plus PDV
- Troškovi prijevoza
- nisu uključeni
- Uvjeti dostave
- FCA Škofja Loka, ukrcano na kamion
- Uvjeti plaćanja
- 100% plaćanje prije preuzimanja
Tehničke pojedinosti
- promjer tokarenja
- 300 mm
- Dužina tokarenja max.
- 510 mm
- serijski broj
- ML0406-000788
- radni hod po osi x
- 205 mm
- radni hod po osi y
- 105 mm
- radni hod po osi z
- 560 mm
- Očitani operativni sati
- 15.386 h
- Uključujući pribor
- Da
- upravljanje
- FANUC 0T PLUS
- provrt ose
- 67 mm
- raspon brzine tokarenja
- 4.500 1/min
- Približna masa
- 4.500 kg
- približno određivanje mjere (d x š x v)(
- 2.900 x 1.800 x 2.100 mm
Opis artikla
- serial number: ML0406-000788
- operating hours: approx. 15386 hrs.
- control: FANUC 0T PLUS
- 15-inch monitor - touch panel
- Memory: 2MB
- max. turning length: 510 mm
- max. turning diameter: 300 mm
- turning diameter over face slide: 600 mm
- turning diameter over bed slide: 600 mm
- turning diameter over top slide: 210 mm
- max. workpiece weight: 150 kg
- max. spindle speed: 4500 rpm
- spindle bore: 67 mm
- bar diameter: 67 mm
- travels:
- X-axis: 205 mm
- Y-axis: 105 mm
- Z-axis: 560 mm
- rapid traverse:
- X-axis: 30 m/min.
- Y-axis: 10 m/min.
- Z-axis: 36 m/min.
- main spindle with 3-jaw chuck: 10 mm / 8"
- Main spindle: 4,500 min-1]
- P = 15/15/11 kW
- m(max) = 169 Nm
- 3-jaw chuck lower spindle: 135 mm / 5"
- lower spindle: 6,000 rpm
- P = 5.5/5.5/3.7 kW
- m(max) = 47 Nm
- turret - 12 PO/24 INDEX BMT45
- standard tooling: 8x
- tool stand: 2x
- axially driven tool: 2x
- angle-driven tool
- automatic tool measuring hand: RENISHAW
- high pressure pump: #1 5.0 bar - 50 Hz/1.8 kW
- panel filter system:
- Filtration: 20 μm
- Flow rate: 30 l/min
- normal pressure pump: #2 2.0 bar
- high pressure pump #3 12.0 bar with special valve system for continuous operation between tool changes
- part ejection system through the counter spindle
- water cooling through counter spindle
- CNC Autodoor
- oil separator
- parts collector with drawer
- parts collector with conveyor system and bar feeder interface
- DOOSAN axis overload system (measuring system)
- automatic shutdown function
- aignal tower light
- robot interface
- coolant level sensor
- chip conveyor system
- LOSMA air filter system with separating effect
- water spray gun with electronic control
- included in the scope of delivery:
- 3-jaw chuck main spindle
- 3-jaw chuck counter spindle
- 7 x tool holders (2 ID, 3 OD, 1 linear drive, 1 angular drive)
- parts conveyor
- LNS chip conveyor
- LOSMA fume extraction system
- high pressure pump 14 bar
- all other items shown in the pictures are not included in the scope of delivery
- available from 02.12.2024
Automatski prijevod
Detalji aukcije
- Naziv aukcije
- Machinery Modernization of a Mechanical Engineering and Automation Company in Slovenia
- Lot br.
- 1
- Dokumenti
- Uvjeti i pravila ove aukcije
- Provjera stanja
-
Četvrtak, od 05.12.2024, od 11:00
sati do 15:00
sati
4221 Škofja Loka, Slovenia
-Inspection by prior appointment only!-
- Termini
Četvrtak, od 05.12.2024, od 11:00 sati do 15:00 sati - 4221 Škofja Loka, Slovenia
-Inspection by prior appointment only!-
Naše usluge
- Osobna usluga na 16 jezika
- Savjetovanje na lokaciji putem stručnjaka
- Organizacija prijevoza po potrebi
- Podrška s papirologijom i carinjenjem