CNC strug DN SOLUTIONS PUMA DNT2600
Top lot
Lot br. 2
40.000 €
3 Ponude 25 promatrača
Prijavite se za sudjelovanje u dražbi
€
Upotrijebi nadmetača
Provizija i PDV
11.12.2024 11:01
Zatvaranje aukcije
40.000 €
Trenutno najviša ponuda
Pojedinosti ponude
- Naziv
- CNC strug DN SOLUTIONS PUMA DNT2600
- Broj artikla
- 969012
- Proizvođač
- DN SOLUTIONS
- Tip
- PUMA DNT2600
- Snimke
-
Video 1 - Godina proizvodnje
- 2023
- Artikl dostupan od
- 06.01.2025
- Stanje artikla
- Lokacija
-
Slovenija, 4221 Škofja Loka
- Prikaži na karti
- Svi artikli na ovoj lokaciji
Troškovi i povlastice
- 19 %
- 1.750,00 €
- Ukupna cijena
- plus PDV
- Troškovi prijevoza
- nisu uključeni
- Uvjeti dostave
- FCA Škofja Loka, ukrcano na kamion
- Uvjeti plaćanja
- 100% plaćanje prije preuzimanja
Tehničke pojedinosti
- promjer tokarenja
- 460 mm
- Dužina tokarenja max.
- 658 mm
- serijski broj
- ML0492-000098
- radni hod po osi x
- 260 mm
- radni hod po osi z
- 680 mm
- Očitani radni sati
- 4.112 h
- Očitani operativni sati
- 8.253 h
- Uključujući pribor
- Da
- upravljanje
- FANUC 0T PLUS
- položaji mjenjača alata
- 10
- provrt ose
- 81 mm
- raspon brzine tokarenja
- 3.500 1/min
- Približna masa
- 5.500 kg
- približno određivanje mjere (d x š x v)(
- 3.300 x 1.800 x 1.900 mm
Opis artikla
- serial number: ML0492-000098
- operating hours: approx. 8253 hrs.
- working hours: approx. 4112 hrs.
- control: FANUC 0T PLUS
- 15 inch monitor - touch panel
- Memory: 2 MB
- max. turning length: 658 mm
- max. turning diameter: 460 mm
- turning diameter over face slide: 650 mm
- turning diameter over top slide: 460 mm
- max. workpiece weight: 520 kg
- max. spindle speed: 3500 rpm
- spindle bore: 81 mm
- travels:
- X-axis: 260 mm
- Z-axis: 680 mm
- rapid traverse:
- X-axis: 24 m/min.
- Z-axis: 30 m/min.
- bar capacity: 81 mm
- pinol diameter: 100 mm
- pendulum stroke: 100 mm
- 3-jaw chuck main spindle: 250 mm / 10"
- main spindle: 3500 rpm
- P = 26/22/18.5 kW
- m(max) = 735 Nm
- direct tooling: 25x25 or BMT55
- standard tooling: 4 x
- tool stand
- automatic tool measuring hand: RENISHAW
- high pressure pump #1: 5.0 bar - 50 Hz /1.8 kW
- panel filter system:
- filtration: 20 μm
- flow rate: 30 l/min
- high-pressure pump #3: 12.0 bar with special valve system for continuous operation between tool changes
- automatic switch-off function
- oil separator
- parts collector with interface between drawer and bar feeder
- DOOSAN axis overload system (measuring system)
- signal tower light
- coolant level sensor Tailstock, programmable, hydraulic
- chip conveyor system
- water spray gun with electronic control
- included in the scope of delivery:
- 3-jaw chuck main spindle
- 3-jaw chuck counter spindle
- 5 x tool holders (2 ID, 3 OD)
- chip conveyor
- high pressure pump 14 bar
- BREUNING IRCO bar loader 1200 mm
- other accessories shown in the pictures are not included in the scope of delivery
- available from 06.01.2025
Automatski prijevod
Detalji aukcije
- Naziv aukcije
- Machinery Modernization of a Mechanical Engineering and Automation Company in Slovenia
- Lot br.
- 2
- Dokumenti
- Uvjeti i pravila ove aukcije
- Provjera stanja
-
Četvrtak, od 05.12.2024, od 11:00
sati do 15:00
sati
4221 Škofja Loka, Slovenia
-Inspection by prior appointment only!-
- Termini
Četvrtak, od 05.12.2024, od 11:00 sati do 15:00 sati - 4221 Škofja Loka, Slovenia
-Inspection by prior appointment only!-
Naše usluge
- Osobna usluga na 16 jezika
- Savjetovanje na lokaciji putem stručnjaka
- Organizacija prijevoza po potrebi
- Podrška s papirologijom i carinjenjem