CNC strug DOOSAN LYNX 2600SY

CNC strug DOOSAN LYNX 2600SY
Top lot
Lot br. 3
Zatvaranje aukcije: 11.12.2024 11:02
48.500 € Trenutno najviša ponuda
2 Ponude 24 promatrača
Prijavite se za sudjelovanje u dražbi
Upotrijebi nadmetača
Provizija i PDV
CNC strug DOOSAN LYNX 2600SY
11.12.2024 11:02
Zatvaranje aukcije
48.500 €
Trenutno najviša ponuda
Naziv
CNC strug DOOSAN LYNX 2600SY
Broj artikla
969015
Proizvođač
DOOSAN
Tip
LYNX 2600SY
Godina proizvodnje
2020
Artikl dostupan od
06.01.2025
Stanje artikla
Lokacija
Slovenija, 4221 Škofja Loka
provizije
19 %
Troškovi demontiranja i ukrcaja (obvezujuće)
1.750,00 €
Ukupna cijena
plus PDV
Troškovi prijevoza
nisu uključeni
Uvjeti dostave
FCA Škofja Loka, ukrcano na kamion
Uvjeti plaćanja
100% plaćanje prije preuzimanja
promjer tokarenja
380 mm
Dužina tokarenja max.
610 mm
serijski broj
ML0440-000030
radni hod po osi x
250 mm
radni hod po osi y
105 mm
radni hod po osi z
680 mm
Očitani radni sati
13.389 h
Očitani operativni sati
26.334 h
upravljanje
FANUC 0T PLUS
položaji mjenjača alata
12
provrt ose
82 mm
raspon brzine tokarenja
3.500 1/min
potrebna ukupna snaga
18.5 kW
Približna masa
6.200 kg
približno određivanje mjere (d x š x v)(
3.300 x 1.900 x 2.300 mm
  • serial number: ML0440-000030
  • operating hours: approx. 26334 hrs.
  • working hours: approx. 13389 hours
  • control: FANUC 0T PLUS
    • 15-inch monitor - touch panel
    • Memory: 2MB
 
  • max. turning diameter: 380 mm
  • max. turning length: 610 mm
  • bar capacity: 81 mm
 
  • travels:
    • X-axis: 250 mm
    • Y-axis: 105 mm
    • Z-axis: 680 mm
    • B-axis: 680 mm
  • rapid traverse:
    • X-axis: 30 m/min.
    • Y-axis: 10 m/min.
    • Z-axis: 30 m/min.
 
  • max. spindle speed: 3500 rpm.
  • spindle power: 18.5 kW
  • spindle bore: 82 mm
  • counter spindle:
    • max. speed: 4500 rpm.
    • power: 7.5 kW
  • number of tool positions: 12
 
  • main spindle with 3-jaw chuck: 250 mm / 10"
  • 3-jaw chuck counter spindle: 170 mm / 6"
  • turret: 12 PO/24 INDEX BMT55
  • standard tooling: 6x
  • tool holder: 2x
  • axially driven tool: 2x
  • angle-driven tool
  • RENISHAW automatic tool measuring hand
  • CNC Autodoor
  • double hydraulic pressure on the main spindle (low to high pressure for machining thin parts)
  • automatic shut-off function
  • high pressure pump #1: 5.0 bar - 50 Hz / 1.8 kW
  • panel filter system:
    • filtration: 20 μm
    • flow rate: 30 l/min
  • normal pressure pump #2: 2.0 bar
  • high pressure pump #3: 12.0 bar with special valve system for continuous operation between tool changes
  • part ejection system through the counter spindle
  • water through the counter spindle
  • oil separator
  • coolant level sensor
  • parts collector with drawer
  • parts collector with bar conveyor interface
  • DOOSAN axis overload system (measuring system)
  • signal tower light
  • robot interface
  • profinet chip conveyor system - LNS
  • LOSMA air filter system with separation effect
  • water spray gun, with electronic control unit
 
  • transport dimensions bar loader: 2000 mm x 1200 mm x 1500 mm, weight 2500 kg
 
  • included in the scope of delivery:
    • 3-jaw chuck main spindle
    • 3-jaw chuck counter spindle
    • 7 x tool holders (2 ID, 3 OD, 1 linear drive, 1 angular drive)
    • parts conveyor
    • chip conveyor
    • LOSMA fume extraction system
    • high pressure 14 bar pump
 
  • available from 06.01.2025
Prikaži prijevod
Automatski prijevod
Naziv aukcije
Machinery Modernization of a Mechanical Engineering and Automation Company in Slovenia
Lot br.
3
Dokumenti
Uvjeti i pravila ove aukcije
Provjera stanja
Četvrtak, od 05.12.2024, od 11:00 sati do 15:00 sati
4221 Škofja Loka, Slovenia

-Inspection by prior appointment only!-
Rezervirajte termin obilaska
  • Termini
    Četvrtak, od 05.12.2024, od 11:00 sati do 15:00 sati
  • 4221 Škofja Loka, Slovenia

    -Inspection by prior appointment only!-


Naše usluge
  • Osobna usluga na 16 jezika
  • Savjetovanje na lokaciji putem stručnjaka
  • Organizacija prijevoza po potrebi
  • Podrška s papirologijom i carinjenjem