Top lot
Lot br. 50
Početak aukcije: 07.01.2025 10:49
5 promatrača
Pojedinosti ponude
- Naziv
- GILDEMEISTER NEF 400 CNC lathe
- Broj artikla
- 976696
- Proizvođač
- GILDEMEISTER
- Tip
- NEF 400
- Godina proizvodnje
- 2008
- Artikl dostupan od
- immediately
- Stanje artikla
- Lokacija
-
Njemačka, 70191 Stuttgart
- Prikaži na karti
- Svi artikli na ovoj lokaciji
Troškovi i povlastice
- 19 %
- 400,00 €
- Ukupna cijena
- plus PDV
- Troškovi prijevoza
- nisu uključeni
- Uvjeti dostave
- FCA Stuttgart, ukrcano na kamion
- Uvjeti plaćanja
- 100% plaćanje prije preuzimanja
Tehničke pojedinosti
- Približna masa
- 2.800 kg
- približno određivanje mjere (d x š x v)(
- 2.100 x 1.700 x 1.700 mm
Opis artikla
Machine number: 0171000971A
Operating voltage: 400 V
Frequency: 50 Hz
Rated current: 35 A
Control voltage: 230 V
Spindle speed: up to 4000 rpm
Control unit: SIEMENS 840 D POWERLINE
Working range:
Swing diameter over bed: 400 mm
Swing diameter over facing slide: 270 mm
Turning length: 650 mm
Travel distances:
X: 220 mm
Z: 700 mm
Main spindle:
Spindle diameter in the front bearing: 90 mm
Spindle bore: 65 mm
Hollow taper of the spindle nose: 72 metric
Chuck: 200 mm
Tool carrier:
Number of tool stations direct mounting: 8
Shank cross-section: 20 x 20 mm
Key shaft tool disk: 220 mm
Shank diameter for boring bars: 25 mm
Tailstock:
Quill force: max. 680 daN
Centre punch tip: MK 4
Quill diameter: 65 mm
Quill stroke: 40 mm
The machine has a tailstock, a tool changer and a three-jaw chuck from the manufacturer SCHUNK (diameter: 200 mm) as well as documentation
Operating voltage: 400 V
Frequency: 50 Hz
Rated current: 35 A
Control voltage: 230 V
Spindle speed: up to 4000 rpm
Control unit: SIEMENS 840 D POWERLINE
Working range:
Swing diameter over bed: 400 mm
Swing diameter over facing slide: 270 mm
Turning length: 650 mm
Travel distances:
X: 220 mm
Z: 700 mm
Main spindle:
Spindle diameter in the front bearing: 90 mm
Spindle bore: 65 mm
Hollow taper of the spindle nose: 72 metric
Chuck: 200 mm
Tool carrier:
Number of tool stations direct mounting: 8
Shank cross-section: 20 x 20 mm
Key shaft tool disk: 220 mm
Shank diameter for boring bars: 25 mm
Tailstock:
Quill force: max. 680 daN
Centre punch tip: MK 4
Quill diameter: 65 mm
Quill stroke: 40 mm
The machine has a tailstock, a tool changer and a three-jaw chuck from the manufacturer SCHUNK (diameter: 200 mm) as well as documentation
Automatski prijevod
Detalji aukcije
- Naziv aukcije
- Closure of a Model Maker
- Lot br.
- 50
- Dokumenti
- Uvjeti i pravila ove aukcije
- Provjera stanja
-
Točna lokacija artikala na upit.
70191 Stuttgart, Germany
- address on request only -
Viewing by prior appointment only!
Please book a binding inspection appointment stating the lot number/s via awa@surplex.com!
- Preuzimanje
-
Četvrtak, od 09.01.2025 do
Petak, 10.01.2025, od 08:00 sati do 16:00 sati
Ponedjeljak, od 13.01.2025 do
Četvrtak, 16.01.2025, od 08:00 sati do 16:00 sati
Naše usluge
- Osobna usluga na 16 jezika
- Savjetovanje na lokaciji putem stručnjaka
- Organizacija prijevoza po potrebi
- Podrška s papirologijom i carinjenjem