HOMAG KL 78 A 20 kanterica
Pojedinosti ponude
- Naziv
- HOMAG KL 78 A 20 kanterica
- Broj artikla
- 958679
- Proizvođač
- HOMAG
- Tip
- KL 78 A 20
- Snimke
-
Video 1 - Godina proizvodnje
- 1996
- Artikl dostupan od
- Immediately
- Stanje artikla
- Lokacija
-
Portugal, 4615-047 Freixo de Cima
- Prikaži na karti
- Svi artikli na ovoj lokaciji
Troškovi i povlastice
- 2.700,00 €
- Troškovi prijevoza
- nisu uključeni
- Uvjeti dostave
- FCA Freixo de Cima, ukrcano na kamion
- Uvjeti plaćanja
- 100% plaćanje prije preuzimanja
Tehničke pojedinosti
- približno određivanje mjere (d x š x v)(
- 9.900 x 1.700 x 1.850 mm
- Približna masa
- 8.500 kg
Opis artikla
• Edgebander
• Serial number 0-200-13-2735
• Edge thickness in strips from 0.40 mm up to 12 mm
• Edge thickness in roll from 0.30 mm up to 3 mm
• Worpiece thickness from 12 mm up to 60 mm
• Minimum workpiece width 85 mm
• Adjustable feed speed from 18 m/min up to 24 m/min
• Feed motor 1.10 kW
• HOMATIC control
• Edge feeder for strips and roll, edge magazine for one edge coil
• A20 gluing unit with pot for granulated hot melt adhesive
• Pressure group with (1+6) rollers
• End trimming unit, 2 motors
• Rough trimming unit, 2 motors
• Fine trimming unit, 2 tilting motors
• Profile trimming unit, 4 x motor 0.40 kW, 12000 rpm
• Milling group tilting from 0° up to 90°, motor 5 kW-11500 rpm
• Flat scraping unit
• Profile scraping unit
• Sanding belt unit
• Edge buffing unit, 2 motors
• Serial number 0-200-13-2735
• Edge thickness in strips from 0.40 mm up to 12 mm
• Edge thickness in roll from 0.30 mm up to 3 mm
• Worpiece thickness from 12 mm up to 60 mm
• Minimum workpiece width 85 mm
• Adjustable feed speed from 18 m/min up to 24 m/min
• Feed motor 1.10 kW
• HOMATIC control
• Edge feeder for strips and roll, edge magazine for one edge coil
• A20 gluing unit with pot for granulated hot melt adhesive
• Pressure group with (1+6) rollers
• End trimming unit, 2 motors
• Rough trimming unit, 2 motors
• Fine trimming unit, 2 tilting motors
• Profile trimming unit, 4 x motor 0.40 kW, 12000 rpm
• Milling group tilting from 0° up to 90°, motor 5 kW-11500 rpm
• Flat scraping unit
• Profile scraping unit
• Sanding belt unit
• Edge buffing unit, 2 motors
Automatski prijevod
Izravna prodaja
Pedro Carriço
Na zahtjev
Cijena
Pedro Carriço
Naše usluge
- Usluga demontaže i ponovne montaže
- Globalna logistička mreža
- Individualno savjetovanje
- Podrška s papirologijom i carinjenjem