horizontalna tračna brusilica KUHLMEYER LBS 2.10 - 8000
Pojedinosti ponude
- Naziv
- horizontalna tračna brusilica KUHLMEYER LBS 2.10 - 8000
- Broj artikla
- 938498
- Proizvođač
- KUHLMEYER
- Tip
- LBS 2.10 - 8000
- Dokumenti
- AB_Kuhlmeyer_LBS1.pdf Layout.pdf
- Snimke
-
Video 1 - Godina proizvodnje
- 2018
- Artikl dostupan od
- immediately
- Stanje artikla
- dobro, u pogonu
- Lokacija
-
Njemačka, 41747 Viersen
- Prikaži na karti
- Svi artikli na ovoj lokaciji
Troškovi i povlastice
- Troškovi prijevoza
- nisu uključeni
- Uvjeti dostave
- EXW Viersen, stroj na temeljima, nezapakiran
- Uvjeti plaćanja
- 100% plaćanje prije preuzimanja
Tehničke pojedinosti
- serijski broj
- 180710/1
- dužina stola
- 8.000 mm
- dubina stola
- 3.000 mm
- dimenzije brus trake
- 160 x 9400 mm
- približno određivanje mjere (d x š x v)(
- 15.000 x 5.850 x 3.400 mm
- Približna masa
- 2.500 kg
Opis artikla
The young KUHLMEYER Long Belt Grinding Machine is a powerful solution for automatic surface grinding of large metal sheets and weld seams. With a table length of 8 metres and 120 operating hours, it offers efficiency and precision.
In 2019, the machine was supplemented with a barely used ULMATEC Suction Unit.
Serial number and Type of the Long Belt Grinding Machine
Control system
Software
ULMATEC extraction system from 2019
In 2019, the machine was supplemented with a barely used ULMATEC Suction Unit.
Serial number and Type of the Long Belt Grinding Machine
- Serial number: 180710/1
- Type: LBS 2.10 - 8000
- Machine table length: 8.000 mm (could be extended as required)
- Machine table width: 3.000 mm
- Travelling rail length approx.: 14.200 mm (could be extended as required)
- Grinding head stroke approx.: 80 mm (currently 45 mm above table edge → 35 mm below table edge)
- Installed grinding belt dimensions: 160 x 9.400 mm
Control system
- PLC control: SIEMENS Simatic S7
Software
- Grinding belt speed
- Contact roller speed
- Grinding pressures
- Insertion and removal control
- Grinding time start and end of workpiece
- Grinding belt drive unit frequency-controlled: 15 kW
- Grinding belt speed: 15 - 38 m/s
ULMATEC extraction system from 2019
- Travelling extraction via a suction slot channel
- Pre-separator
- SCHUKO rotary valve type: ZRS 09.430 x 270 mm
- Fire protection system and spark detection
- Swivelling control console + radio remote control
- Moulded guide tracks
- Spare rollers with ball bearings and various sanding belts
- Additional sanding belts can be purchased for a fee after an inspection
- 120 operating hours read off
Automatski prijevod
Izravna prodaja
1 promatrač
1
Promatrač
Na zahtjev
Cijena
Naše usluge
- Usluga demontaže i ponovne montaže
- Globalna logistička mreža
- Individualno savjetovanje
- Podrška s papirologijom i carinjenjem