SUMITOMO DEMAG INTELECT 100/470-500 Injection moulding machine
Top lot
Lot br. 10
5.900 €
1 ponuda 13 promatrača
Prijavite se za sudjelovanje u dražbi
€
Upotrijebi nadmetača
Provizija i PDV
28.11.2024 14:09
Zatvaranje aukcije
5.900 €
Trenutno najviša ponuda
Pojedinosti ponude
- Naziv
- SUMITOMO DEMAG INTELECT 100/470-500 Injection moulding machine
- Broj artikla
- 967478
- Proizvođač
- SUMITOMO DEMAG
- Tip
- INTELECT 100/470-500
- Godina proizvodnje
- 2012
- Artikl dostupan od
- immediately
- Stanje artikla
- Lokacija
-
Njemačka, 04746 Hartha
- Prikaži na karti
- Svi artikli na ovoj lokaciji
Troškovi i povlastice
- 19 %
- 500,00 €
- Ukupna cijena
- plus PDV
- Troškovi prijevoza
- nisu uključeni
- Uvjeti dostave
- FCA Hartha, ukrcano na kamion
- Uvjeti plaćanja
- 100% plaćanje prije preuzimanja
Tehničke pojedinosti
- približno određivanje mjere (d x š x v)(
- 5.000 x 2.000 x 2.200 mm
- Približna masa
- 5.000 kg
Opis artikla
Machine number: 7260-0239
Operating voltage: 400 V
Frequency: 50 Hz
Rated current: 104 A
Control system: SUMITOMO DEMAG
Closing force: 1100 kN
Closing force: 1100 kN
Opening stroke: max. 380 mm
Mould installation height: min. 200 mm
Mould installation height: max. 430 mm
Max. Distance between the mould mounting platens: 810 mm
Mould mounting platens: 620 x 620 mm
Distance between light columns: 470 x 420 mm
Mould weight: max. 780 kg
Of which mould weight on the movable
mould mounting platen: 500 kg
Ejector path: 110 mm
Ejector force: 35 kN
Ejector retraction force: 35 kN
Screw diameter: 45 mm
Specific injection pressure: 1690 bar
Stroke volume: 294 cm³
Injection part weight: 262 g
Metering stroke: max. 185 mm
Nozzle travel: max. 350 mm
Nozzle immersion depth: 20 mm
Nozzle contact pressure: 30 kN
Operating voltage: 400 V
Frequency: 50 Hz
Rated current: 104 A
Control system: SUMITOMO DEMAG
Closing force: 1100 kN
Closing force: 1100 kN
Opening stroke: max. 380 mm
Mould installation height: min. 200 mm
Mould installation height: max. 430 mm
Max. Distance between the mould mounting platens: 810 mm
Mould mounting platens: 620 x 620 mm
Distance between light columns: 470 x 420 mm
Mould weight: max. 780 kg
Of which mould weight on the movable
mould mounting platen: 500 kg
Ejector path: 110 mm
Ejector force: 35 kN
Ejector retraction force: 35 kN
Screw diameter: 45 mm
Specific injection pressure: 1690 bar
Stroke volume: 294 cm³
Injection part weight: 262 g
Metering stroke: max. 185 mm
Nozzle travel: max. 350 mm
Nozzle immersion depth: 20 mm
Nozzle contact pressure: 30 kN
Automatski prijevod
Detalji aukcije
- Naziv aukcije
- Machinery and Inventory for Plastics Processing
- Lot br.
- 10
- Dokumenti
- Uvjeti i pravila ove aukcije
- Provjera stanja
-
Točna lokacija artikala na upit.
04746 Hartha and 04680 Colditz, Germany
- address on request only -
Viewing by prior appointment only!
Please book a binding inspection appointment stating the lot number/s via awa@surplex.com!
- Preuzimanje
-
Utorak, od 10.12.2024 do
Petak, 13.12.2024, od 08:00 sati do 16:00 sati
Naše usluge
- Osobna usluga na 16 jezika
- Savjetovanje na lokaciji putem stručnjaka
- Organizacija prijevoza po potrebi
- Podrška s papirologijom i carinjenjem