SUMITOMO DEMAG SYSTEC 210/580-840 Injection moulding machine
Top lot
Lot br. 5
4.900 €
15 promatrača
Prijavite se za sudjelovanje u dražbi
€
Upotrijebi nadmetača
Provizija i PDV
28.11.2024 14:04
Zatvaranje aukcije
4.900 €
Početna cijena
Pojedinosti ponude
- Naziv
- SUMITOMO DEMAG SYSTEC 210/580-840 Injection moulding machine
- Broj artikla
- 967473
- Proizvođač
- SUMITOMO DEMAG
- Tip
- SYSTEC 210/580-840
- Godina proizvodnje
- 2012
- Artikl dostupan od
- immediately
- Stanje artikla
- Lokacija
-
Njemačka, 04746 Hartha
- Prikaži na karti
- Svi artikli na ovoj lokaciji
Troškovi i povlastice
- 19 %
- 500,00 €
- Ukupna cijena
- plus PDV
- Troškovi prijevoza
- nisu uključeni
- Uvjeti dostave
- FCA Hartha, ukrcano na kamion
- Uvjeti plaćanja
- 100% plaćanje prije preuzimanja
Tehničke pojedinosti
- približno određivanje mjere (d x š x v)(
- 7.000 x 2.000 x 2.100 mm
- Približna masa
- 9.000 kg
Opis artikla
Machine number: 80330117
Operating voltage: 3 x 400 V
Frequency: 50 Hz
Rated current: 178 A
Control system: SUMITOMO DEMAG
Closing force: 2100 kN
Locking force: 2310 kN
Opening stroke: max. 575 mm
Mould installation height: min. 340 mm
Mould installation height: max. 690 mm
Screw diameter: 60 mm
Injection pressure: 1351 bar
Stroke volume: 636 cm³
Injection part weight: 579 g
Nozzle travel: max. 460 mm
Max. Distance between the mould mounting platens: 1265 mm
mould mounting platens: 860 x 860 mm
Distance between lights and columns: 580 x 580 mm
Max. Mould weight: 3300 kg
Max. Weight of moving mould platen: 2000 kg
Max. Weight of fixed mould platen: 2500 kg
Ejector travel: 180 mm
Ejector force: 73 kN
Ejector retraction force: 630 kN
Dosing path: max. 225 mm
Nozzle immersion depth: 20 mm
Nozzle contact pressure: 110 kN
Operating voltage: 3 x 400 V
Frequency: 50 Hz
Rated current: 178 A
Control system: SUMITOMO DEMAG
Closing force: 2100 kN
Locking force: 2310 kN
Opening stroke: max. 575 mm
Mould installation height: min. 340 mm
Mould installation height: max. 690 mm
Screw diameter: 60 mm
Injection pressure: 1351 bar
Stroke volume: 636 cm³
Injection part weight: 579 g
Nozzle travel: max. 460 mm
Max. Distance between the mould mounting platens: 1265 mm
mould mounting platens: 860 x 860 mm
Distance between lights and columns: 580 x 580 mm
Max. Mould weight: 3300 kg
Max. Weight of moving mould platen: 2000 kg
Max. Weight of fixed mould platen: 2500 kg
Ejector travel: 180 mm
Ejector force: 73 kN
Ejector retraction force: 630 kN
Dosing path: max. 225 mm
Nozzle immersion depth: 20 mm
Nozzle contact pressure: 110 kN
Automatski prijevod
Detalji aukcije
- Naziv aukcije
- Machinery and Inventory for Plastics Processing
- Lot br.
- 5
- Dokumenti
- Uvjeti i pravila ove aukcije
- Provjera stanja
-
Točna lokacija artikala na upit.
04746 Hartha and 04680 Colditz, Germany
- address on request only -
Viewing by prior appointment only!
Please book a binding inspection appointment stating the lot number/s via awa@surplex.com!
- Preuzimanje
-
Utorak, od 10.12.2024 do
Petak, 13.12.2024, od 08:00 sati do 16:00 sati
Naše usluge
- Osobna usluga na 16 jezika
- Savjetovanje na lokaciji putem stručnjaka
- Organizacija prijevoza po potrebi
- Podrška s papirologijom i carinjenjem