BOLEY 5LZ Lathe

Center height: 130 mm
Center width: 500 mm
Maximum turning length (with automatic feed): 500 mm
Headstock for collets a 12 size 4
Spindle bore: 23 mm
Largest collet bore:
Continuous: 16 mm
Not continuous: 20 mm
Spindle speeds (load speeds): Number 22, 28 - 3550 rpm
Step change: 1.25
Gear reduction in the headstock: 1:4
Gearbox: 1:4
Tailstock:
Inner taper of the quill: Morse 3
Quill longitudinal movement: 100 mm
Lateral adjustment left and right: 10 mm
Support:
Maximum travel of the bed slide: 500 mm
Travel of the longitudinal slide: 100 mm
Travel of the face carriage: 190 mm
Largest circulation diameter over bed slide: 200 mm
Over support bottom slide: 140 mm
Steel cross-section: up to 16 x 16 mm
Feed rates 9 x longitudinal: 0.063 - 0.4 mm/rev
9 x flat: 0.032 - 0.2 mm/rev
Smallest feeds for fine turning: up to 0.01 mm/rev
Lead screw depth: 36 x 6 mm
For further technical data see pictures
With technical documentation as shown in the pictures
With accessories in tool cabinet (see pictures) Mostra traduzione