BRANDT HIGHFLEX 1230 Edge banding machine

Edge material strips ¦ 0.4 - 6 mm
ELECTRONIC CONTROL EASY CONTROL EC 10+ / AUTOMATIC EDGE FEEDER Edge material roll ¦ 3 mm
Workpiece thickness ¦ 8 - 60 mm
Feed rate¦ 11m/min
Workpiece width min: - For workpiece thickness 8-22 mm ¦ 70 mm*
TOOL SET R = 2 MM

Equipment of the units:
- JOINT MILLING UNIT 2 X 2.2 KW 200 HZ/ GLUING UNIT A6
- PNEUMATIC 2-POINT ADJUSTMENT PRESSURE ZONE
- CHOPPING UNIT CHAMFER/STRAIGHT 2 X 0.18 KW - PNEUMATIC ADJUSTMENT CHOPPING CHAMFER/STRAIGHT
- JOINT MILLING UNIT 2 X 0.27 KW COUNTER ROTATION - PNEUMATIC MILLING CHAMFER / RADIUS / STRAIGHT
- FORM MILLING UNIT 1 X 0.35 KW WD 60
- SCRAPER BLADE WITH QUICK-CHANGE HEADS - PNEUMATIC ADJUSTMENT OF SCRAPER BLADE
- GLUE JOINT SCRAPER
- BUFFING UNIT 2 MOTORS
- CONTROL TEXTS: FINNISH

Scope of delivery:
1. operating instructions, consisting of commissioning, operating and maintenance instructions on DIN A4 paper and CD-ROM in English
2. on-screen operating texts for machine operators, for the PC 20+ and EC 10+ controls
3. spare parts designations, in English,

PRICING IN FUNCTIONALLY TESTED CONDITION incl. NEW TOOLS - SALE WITHOUT WARRANTY!

Data is taken from the manufacturer's brochure/documents and may differ from the actual values.

ATTENTION: It is expressly pointed out that this lot only corresponds to the scope of the lot description. If the photo shows objects that are not expressly listed in the lot description, these are not part of the sale. part of the sale. This naturally also applies to tools, additional equipment, accessories, software, equipment, etc. (in relation to the photo and lot description). Mostra traduzione