Tornio CMZ TL 25 a

Dual spindle lathe 

Numerical control FANUC SERiES 31I MODEL a 

Tools included 

1 Blade holder 

3 Double dressing tool holders 

1 Single straightening tool holder 

2 Tool holders for double boring bar Ø32mm (short) 

1 Tool holder for single boring bar Ø40mm (short) 

2 Tool holders for Ø42mm boring bar (long) 

2 Radial motorised tool holders (collet up to Ø20mm) without collet 

1 Axial motorised tool holder (spindle 1) (collet up to Ø20mm) without collet 

2 Axial motorised tool holders (spindle 2) (clamp up to Ø20mm) without clamp 

2 Double axial motorised tool holders (spindle 1 and 2) (collet up to Ø20mm) without collet + Set of jaws 

Rotation on bed 685mm 

Rotation on cross slide 510mm 

Maximum turning diameter 400mm 

Distance between centres 676mm 

Spindle speed 50-4000mm 

Main spindle power 19/14 kw CV 

Maximum torque fanuc 477nms 25% 

Spindle nose ASA6 A2 S

Spindle internal diameter 73mm 

Chuck diameter 250/210 bar capacity of chuck 66mm 

Outside diameter front bearings 170mm 

Front bearings inner diameter 110mm 

2nd spindle 

Speed of second spindle (Fanuc) 50 5000min 

Power of second spindle 30 min/continuous (Fanuc) 14/8kw (CV)| 

Maximum torque (Fanuc) Nose of second spindle ASA 5 A2 

Inside diameter of spindle 43mm bar passage 32mm 

Chuck diameter 130mm 

Chuck bar passage 32mm 

Front bearing outside diameter 125mm 

Front bearing inner diameter 80mm 

Turret number of positions 12 

Indexing time for two adjacent positions 0,15 sec

 Indexing time 180 degrees 0,5sec 

Square of external tools 25mm 

Maximum boring tool diameter 50mm 

Axis Rapid feedsX/Z/B(2nd spindle) 18/24/24 m/min X-axis travel 240 mm Z axis path 640 mm B-axis travel 520 mm (2 spindles) X/Z/B axis power 1.0 3.0.2.1kw Thrust force X / Z axis / 6283(641)/ 6283 (641) N(K9)| 

Approximate machine weight 5700 kg 

Dimension : 2322mmx1603mmx1800mm