Tornio automatico TRAUB TNM 42 CNC

Machine number: 814
Operating voltage: 400 V
Control voltage: 24 V
Rated current: 40 A
Connection: 21 kW
Read operating hours: 15489
Control system: TRAUB SYSTEM TX 8H
Largest passage: 42 mm
Smallest passage: 7 mm
Thread on collet chuck: M56 x 1.5 LI
Fitting diameter of collet chuck front bearing:
Outer diameter: 140 mm
Diameter inside: 90 mm
Rear bearing:
Outer diameter: 125 mm
Diameter inside: 80 mm
Collet chuck. max. 37 kN
Collet feed stroke: 100 mm
Feed force: 1600 N
Speed of the work spindle: 40 - 4000 rpm
Grooving slide X2 axis:
Number of slides: 4
Total slide stroke: max. 50 mm
Working stroke: max. 33 mm
Feed force: 4000 N
Rapid traverse speed: 15 m/min
Feed speed: max. 2.5 m/min
Ball screw drive: 25 x 5 mm diameter
Feed cylinder: 35 mm diameter
Usable tool holders TRAUB
Slide length: 320 mm
Slide width: 112 mm
Guide width: 30 mm
Turret slide:
Longitudinal stroke Z-axis: 250 mm
Transverse stroke X-axis: 80 mm
Rapid traverse speed X- and Z-axis: 15 m/min
Feed forces X- and Z-axis: 8500 N
Ball screw drive X-axis: 25 x 5 mm
Z-axis: 32 x 10 mm
Distance between work spindle and turret head:
Number of tool holders: 8
The machine has the X1, Z1, C1, X2 and Z3 axes
Incl. the tool holders located in the tool turret
Incl. chip conveyor and a bar feeder from the manufacturer TRAUB Mostra traduzione