Andere industrie SCANTECH XT 30
Tip
lotnr. 806
9,500 €
Inloggen om te bieden
€
Gebruik maken van biedingsagent
plus veilingkosten en BTW
17-12-2024 14:59
Sluitingstijd
9,500 €
Startbod
Item details
- Naam
- Andere industrie SCANTECH XT 30
- Artikelnummer
- 980017
- Fabrikant
- SCANTECH
- Model / Type
- XT 30
- Documenten
- 6U_Server_Rack_layout.pdf GENERAL_LAYOUT_ULO3-2500.pdf Bahnriss_Schluesselschalter.pdf CE_Declaration_of_conformity_de_STDE190001.pdf Flexscan_userguide_V2.2.1_de.pdf opc-ua_export_v1.0.pdf serverrack_datasheet.pdf ST00025-Installation_Guide_ULO3_rev_1.2_de.pdf ST00033-ULO3_Maintenance_Manual_rev_1.0_de.pdf ULO3_Electrical_drawing_A.9.pdf
- Bouwjaar
- 2020
- Item beschikbaar vanaf
- immediately
- Toestand item
- Locatie
-
Duitsland, 79379 Müllheim i.M.
- Op kaart tonen
- Alle items op deze locatie
Kosten en baten
- 19 %
- 500.00 €
- Eindtotaal
- excl. btw
- Transportkosten
- niet inclusief
- Leveringsvoorwaarden
- FCA Müllheim i.M., verlading op vrachtwagen
- Betalingsvoorwaarden
- 100% vooruitbetaling voor afhaling
Technische details
- instelmaat ca. (l x b x h)
- niet bekend
Omschrijving item
- Thickness gauge ULO3-2500, orientation Left-B
- Flexscan 6 software
- Operator interface
- Server rack with replacement server and UPS
- Communication interface OPC-UA
- Supply voltage: 230V +/- 10%, 50Hz +/- 1%, 20 A, loadable neutral conductor
- Electrical design: in accordance with VDE 100 with declaration of incorporation
- Documentation: 2 x paper
- Documentation language: 2 x German
- Material: PVC foil
- Thickness: 50µm to 1000µm
- Web width: Max. 2100mm
- Web speed: max. 200 m/min
- Line type: PVC calender
- Product tolerance: +/- 5% at 60µm, +/- 3µm
- Measuring accuracy: +/- 0.3µm at 60µm
- Temperatures:
- Measuring point, sensor: < 45°C
- Operating station: < 45°C
Scanner
- Measuring frame ULO3 - 2500 mm
- X-Ray sensor greater than 5keV acceleration voltage, max. 15keV
- DELL PC (without mouse, screen and keyboard)
- 1 EATON UPS for bridging power failures
- 2 server PCs to be able to continue using the other in the event of a failure
- 1 switch
- 4x analog input (2x for your measurement position (4-20mA or 0-10V))
- 4x Analog Output (statistical variables or mean values can be transmitted here via analog signal) (4-20mA or 0-10V)
- 8x digital input (e.g. buttons that trigger actions on the scanner can be connected here. E.g. Start Scan, Stop Scan...)
- 4x digital output (e.g. to control a lamp / horn if, for example, the average value is outside a tolerance)
- 1x rotary encoder (necessary for operation)
- 3x draw-wire sensor for transferring the material width (optional)
- 1x key/switch for bypassing a barrier sensor for maintenance purposes
The seller would like to expressly point out once again that the system must be commissioned with the manufacturer Scantech if it is not used as a spare parts store.
This should be clear to the buyer and, if necessary, clarified with Scantech in advance.
In addition, reference should be made to the approval of the system by the authorities / as well as the training of a radiation protection officer in accordance with specialist knowledge R3 (within Germany).
Automatische vertaling
Veilinggegevens
- lotnr.
- 806
- Documenten
- Specifieke veilingvoorwaarden
- Inspectie
-
De exacte locatie is beschikbaar op aanvraag.
No fixed date. The items are in different locations (see item description). Viewing by appointment only!
Onze diensten
- Persoonlijke service in 16 talen
- Advies ter plaatse & van deskundigen
- Op verzoek organisatie van het transport
- Ondersteuning bij papierwerk en douaneafhandeling