Doorloopboormachine BIESSE TECHNO FDT

Technical specifications    

• Working width: min 205; max: 3.200mm    
• Working depth: min 100mm; max 1.200mm    
• Passage height min 8mm; max: 60mm    

    
Control and program system

• Two section conveyor, with inverter and automatic adjustment by NC
• Regulation of the measurements of the backstops in automatic by NC
• Nr. 5 Double manual pression units
• Nr. 6 Panel supports
• Nr. 2 Horizontal heads, each with nr. 2 motors 1.5 HP each with 11-spindles chuck unit
• Nr. 6 Vertical bottom heads 96 mm width pneumatically operated, nr. 2 motors 1.8 hp and nr. 2 boring chucks
• Nr. 2 Vertical top heads 96 mm width pneumatically operated, nr. 2 motors 1.8 and nr. 2 boring chucks
• Quick positioning of the heads along the beam (""X"" axis) by means of rack and pinion and crank for fine
• adjustment with encoder for position indication
• Quick positioning of each chucks crosswise direction (""Y"" axis) by means of a ball screw and crank for fine
• adjustment with encoder for position indication
• Device for the quick change of boring chucks
• Automatic system to out-put the wood wastes (chips)
• CE Marks