CIM ME2000 Metal embosser

CIM ME2000 Metal embosser
Top Lot
lotnr. 31
Sluitingstijd: 17-10-24 14:30
500 € Startbod
Inloggen om te bieden
Gebruik maken van biedingsagent
plus veilingkosten en BTW
CIM ME2000 Metal embosser
17-10-24 14:30
Sluitingstijd
500 €
Startbod
Naam
CIM ME2000 Metal embosser
Artikelnummer
958617
Fabrikant
CIM
Model / Type
ME2000
Bouwjaar
2020
Item beschikbaar vanaf
Direct
Toestand item
Locatie
Nederland, 7202 CP Zutphen
opgeld
18 %
Kosten demontage & laden (binding)
50.00 €
Eindtotaal
excl. btw
Transportkosten
niet inclusief
Leveringsvoorwaarden
FCA Zutphen, verlading op vrachtwagen
Betalingsvoorwaarden
100% vooruitbetaling voor afhaling
gewicht ca.
80 kg
instelmaat ca. (l x b x h)
630 x 800 x 450 mm
ME2000 Electrical Specification Data Sheet Electrical Specifications
  • Power Supply:117V 60Hz
    230V 50Hz
  • Power Absorbed:900W (ME1000)
    600W (ME2000)
  • Current Max: 8A (both models)
  • Fuses:(2) 5x20 mm
    10A (both models)
  • Logic Microprocessor: 8 bit
  • Backup Power: Lithium Battery 3.6 V
  • PC Interface: RS 232 Asynchronous Programmable
  • Baud Rate: Programmable (Default 9600 Baud)
  • Working Noise: Lower than 75 dB (A)
Embossing Capacity and Technical Features
  • Performance: 1 plate in 18 seconds (55 characters)
  • Input Hopper Capacity:ME1000: Manual feeding
    ME2000: 250 plates (0.4mm) variable dimensions
  • Dot Density: 200 DPI
  • Output Hopper Capacity:ME1000: Manual feeding
    ME2000: Side eject or FIFO elevator (250 plates)
  • Plate Dimensions:Width: Min. 30mm – Max. 115mm
    Height: Min. 21mm – Max. 90mm
    Thickness: 0.4 ÷ 0.9 mm
  • Embossing Area: Up to 65mm from the top edge of the plate, leaving 4mm free from the bottom. Measurements are defined according to the base of the character.
Standard Fonts
  • Simplex 2: Embossing or Indenting
Software/Firmware
  • Software: SWORD PC application (proprietary software)
    Features:Automatic date field
    Plate archive
    Compatibility with DBIII, DBIV, Excel, MS Access files
    Self-diagnostic
    Automatic repetition of faulty plate personalization
    Clearable and non-clearable counters
    Setup procedures (via external keyboard)
  • Extra: Including pc with software.
Automatische vertaling
Veilingnaam
Metaalbewerkingsmachines ivm faillissement
lotnr.
31
Documenten
Specifieke veilingvoorwaarden
Inspectie
De exacte locatie is beschikbaar op aanvraag.
Op afspraak.

Gabriela Angelova (Manager Customer Care)
Gabriela Angelova en team
Klantenservice

Onze diensten
  • Persoonlijke service in 16 talen
  • Advies ter plaatse & van deskundigen
  • Op verzoek organisatie van het transport
  • Ondersteuning bij papierwerk en douaneafhandeling