HOMAG KL 78 A 20 Kantenaanlijmmachine
Item details
- Naam
- HOMAG KL 78 A 20 Kantenaanlijmmachine
- Artikelnummer
- 958679
- Fabrikant
- HOMAG
- Model / Type
- KL 78 A 20
- Video’s
-
Video 1 - Bouwjaar
- 1996
- Item beschikbaar vanaf
- Immediately
- Toestand item
- Locatie
-
Portugal, 4615-047 Freixo de Cima
- Op kaart tonen
- Alle items op deze locatie
Kosten en baten
- 2,700.00 €
- Transportkosten
- niet inclusief
- Leveringsvoorwaarden
- FCA Freixo de Cima, verlading op vrachtwagen
- Betalingsvoorwaarden
- 100% vooruitbetaling voor afhaling
Technische details
- instelmaat ca. (l x b x h)
- 9,900 x 1,700 x 1,850 mm
- gewicht ca.
- 8,500 kg
Omschrijving item
• Edgebander
• Serial number 0-200-13-2735
• Edge thickness in strips from 0.40 mm up to 12 mm
• Edge thickness in roll from 0.30 mm up to 3 mm
• Worpiece thickness from 12 mm up to 60 mm
• Minimum workpiece width 85 mm
• Adjustable feed speed from 18 m/min up to 24 m/min
• Feed motor 1.10 kW
• HOMATIC control
• Edge feeder for strips and roll, edge magazine for one edge coil
• A20 gluing unit with pot for granulated hot melt adhesive
• Pressure group with (1+6) rollers
• End trimming unit, 2 motors
• Rough trimming unit, 2 motors
• Fine trimming unit, 2 tilting motors
• Profile trimming unit, 4 x motor 0.40 kW, 12000 rpm
• Milling group tilting from 0° up to 90°, motor 5 kW-11500 rpm
• Flat scraping unit
• Profile scraping unit
• Sanding belt unit
• Edge buffing unit, 2 motors
• Serial number 0-200-13-2735
• Edge thickness in strips from 0.40 mm up to 12 mm
• Edge thickness in roll from 0.30 mm up to 3 mm
• Worpiece thickness from 12 mm up to 60 mm
• Minimum workpiece width 85 mm
• Adjustable feed speed from 18 m/min up to 24 m/min
• Feed motor 1.10 kW
• HOMATIC control
• Edge feeder for strips and roll, edge magazine for one edge coil
• A20 gluing unit with pot for granulated hot melt adhesive
• Pressure group with (1+6) rollers
• End trimming unit, 2 motors
• Rough trimming unit, 2 motors
• Fine trimming unit, 2 tilting motors
• Profile trimming unit, 4 x motor 0.40 kW, 12000 rpm
• Milling group tilting from 0° up to 90°, motor 5 kW-11500 rpm
• Flat scraping unit
• Profile scraping unit
• Sanding belt unit
• Edge buffing unit, 2 motors
Automatische vertaling
Direct Sale
Pedro Carriço
op aanvraag
Prijs
Pedro Carriço
Onze diensten
- Demontage & Remontage Service
- Wereldwijd logistiek netwerk
- Individueel advies
- Ondersteuning bij papierwerk en douaneafhandeling