MAKINO A51nx 4-axis vertical machining center

MAKINO A51nx 4-axis vertical machining center
lotnr. 3
Sluitingstijd: 19-11-2024 12:02
39,000 € Startbod
2 kijkers
Inloggen om te bieden
Gebruik maken van biedingsagent
plus veilingkosten en BTW
MAKINO A51nx 4-axis vertical machining center
19-11-2024 12:02
Sluitingstijd
39,000 €
Startbod
Naam
MAKINO A51nx 4-axis vertical machining center
Artikelnummer
964792
Fabrikant
MAKINO
Model / Type
A51nx
Documenten
Spezifikation_Makino_80-a51nx-0003_M99.pdf
Video’s
Video 1
Bouwjaar
2011
Item beschikbaar vanaf
immediately
Toestand item
Locatie
Duitsland, 73630 Remshalden-Grunbach
opgeld
19 %
Kosten demontage & laden (binding)
3,000.00 €
Eindtotaal
excl. btw
Transportkosten
niet inclusief
Leveringsvoorwaarden
FCA Remshalden-Grunbach, verlading op vrachtwagen
Betalingsvoorwaarden
100% vooruitbetaling voor afhaling
verplaatsing Z-as
640 mm
verplaatsing X-as
580 mm
verplaatsing Y-as
400 mm
bediening
Professional 5
aantal pallets
2
bereik draaisnelheid
15.000 t/min
voeding
1 - 50.000 mm/min
ijlgang
60 m/min
gewicht ca.
8,500 kg
instelmaat ca. (l x b x h)
6,200 x 2,900 x 2,800 mm
  • Serial number: 0062
  • Control unit: Professional 5
  • Chip conveyor
  • Operating hours: 35.300
  • incl. high-pressure filter system
Travels
  • X-axis travel (column) 580 mm
  • Y-axis travel (spindle) 400 mm
  • Z-axis travel (table) 640 mm
  • Distance pallet surface - spindle center 80 - 720 mm
  • Distance pallet center - spindle nose 100 - 740 mm
  • Linear guides in heavy-duty design (cylindrical rollers) Size 55
  • Size of the ball screw spindles 45
  • Core cooling of the ball screw spindles and bearings via a closed oil circuit. The oil is cooled to the temperature of the machine bed.
Spindle 15,000 rpm
  • Directly driven integral spindle
  • Electronic spindle indexing for synchronization with the feed movements
  • Speed range 50 - 15,000 rpm
  • Oil-air lubrication
  • Jacket cooling spindle housing and motor
  • Main bearing: 2 rows of angular contact ball bearings (inner/outer diameter) 70/110 mm
  • Power (25%ED / cont.) 22 kW / 11 kW
  • Torque (100%ED / cont.) 120 Nm / 42 Nm
  • Acceleration 1.3 s / 15,000 rpm ; 0.4 s / 8,000 rpm
  • Deceleration 1.3 s / 15,000 rpm ; 0.4 s / 8,000 rpm
  • Direct thread cutting 4,000 rpm
Feed drives
  • Rapid traverse speed 60,000 mm/min
  • Feed speed 1 - 50,000 mm/min
  • Feed speed (jog mode) 1 - 8,000 mm/min
Pallet changer
  • Number of pallets 2
  • Changing method pallet changer
  • Pallet change time 5.3 s
  • if pallet tension monitoring is activated 6.3 (5.3 + 1) s Clamping station
  • Manually sliding doors on the clamping station can be rotated manually (not applicable when pallet systems are used)
  • Pallet tension monitoring: Air sensor checks whether the pallet is tensioned on the table in the work area. The pallet change is extended if the function is activated.
  • Automatic program start after pallet change
Motors
  • Main drive AC15 kW
  • Feed drives (XYZ axes) AC4 kW
  • Table (index table) AC0.9 kW
  • Hydraulics 2.2 kW
Connected loads
  • Electrical 3 phase AC 400 V ±10% 50 Hz
  • Connected load 42 kVA
  • Fuse protection 80 A slow-blow
  • Note: Control voltage 100 V AC / 24 V DC
Vertaling tonen
Automatische vertaling
Veilingnaam
Machines and Accessories for Metal Processing
lotnr.
3
Documenten
Specifieke veilingvoorwaarden
Inspectie
De exacte locatie is beschikbaar op aanvraag.
No fixed date. The items are in different locations (see item description).

Viewing by appointment only! Please contact us in advance at lqu@surplex.com for an inspection appointment.


Onze diensten
  • Persoonlijke service in 16 talen
  • Advies ter plaatse & van deskundigen
  • Op verzoek organisatie van het transport
  • Ondersteuning bij papierwerk en douaneafhandeling