Centru de prelucrare CNC (lemn) HOMAG Optimat BAZ 311/52/K

Well-maintained HOMAG Optimat BAZ 311/52/K CNC machining center with HOMAG Optimat TBA 330/20/16 vacuum feeder, main spindle with Flex5 interface and web edge press unit. The main spindle was replaced at the beginning of March 2024 and the costs were EUR 19,000!

HOMAG Optimat BAZ 311/52/K, machine no. 0-201-21-4391
HOMAG Optimat TBA 330/20/16, machine no. 0-205-21-4383

Workpiece length:
- Single occupancy with tool diameter. 25mm max. 5200mm
- Pendulum assignment with tool diameter. 25 mm max. 2150 mm with pendulum occupancy

Workpiece width front stop:
- max. 1525 mm with tool diameter 25mm
- max. 1525 mm with web edge pressing unit
- max. 1450 mm for all units

Workpiece width stop at the back:
- max. 1730 mm with tool diameter 25mm
- max. 1650 mm with web edge press unit
- max. 1600 mm for all units

Main spindle:
- Motor 18.5 KW
- C axis
- Flex5 interface
- Speed range continuously variable 0 - 24000 1/min.
- Vibration sensor

Drill head:
- 17 spindles vertically
- 6 spindles horizontal X axis
- 6 spindles horizontal Y axis

Consoles:
- Length approx. 1600 mm
- 10 pieces
- LED positioning displays for X and Y axes

Pick-up place at the support:
- Web edge press unit
- 2-fold edge magazine with pre-capping station

Chip conveyor belt
Vacuum pump 250 m³/h

The middle step protection mat is deactivated.
The TBA 330 vacuum feeder is deactivated by the software on the computer,
because this is no longer needed and reference runs do not have to be carried out. Time saving!

(Further tools and units for the tool changer are not included within delivery. Availability depends on the delivery of the new machine. A transport rack from HOMAG is required for transportation of the dismantled machine. This results in costs of EUR 6,500,-- (plus tax). After the transport rack has been returned to Helmut Meier (Germany Burgthann), this amount minus a 20 % value deduction is refunded.)

Afișează traducerea