Pentru acest articol este preconizat un preț minim. În cazul în care acest preț nu va fi atins in timpul licitației, vor fi acceptate oferte inferioare. La închiderea licitației vânzătorul va fi informat de oferta cea mai înaltă și va putea decide dacă să vândă pentru cifra respectivă. Surplex va informa cel mai bun ofertant de potențiala victorie a licitației și în timp de două zile lucrătoare după închiderea acesteia va comunica dacă articolul va fi vândut. Până în acel moment ofertantul va fi obligat să respecte propria ofertă.
Articolul are un preț minim
Pentru acest articol este preconizat un preț minim. În cazul în care acest preț nu va fi atins in timpul licitației, vor fi acceptate oferte inferioare. La închiderea licitației vânzătorul va fi informat de oferta cea mai înaltă și va putea decide dacă să vândă pentru cifra respectivă. Surplex va informa cel mai bun ofertant de potențiala victorie a licitației și în timp de două zile lucrătoare după închiderea acesteia va comunica dacă articolul va fi vândut. Până în acel moment ofertantul va fi obligat să respecte propria ofertă.
Oferta ta a fost întrecută de o alta identică
Un alt utilizator a introdus o ofertă identică alei tale înainte de tine
Plata cauțiunii este necesară
Participarea la această licitație este posibilă exclusiv după plata unei cauțiuni. Suma cauțiunii, perioada cauțiunii, persoana de contact și toate celelalte informații pot fi găsite în descrierea articolului.
Din păcate nu este posibil ca managerii noștri de proiect să verifice personal toate articolele. De aceea, în aceste cazuri nu putem garanta funcționalitatea articolelor.
Important note: Fire damage to the control unit and possibly to other components
Important note: Transportation takes place on a standard truck
Important note: the high-speed spindle marked with the number 34 shown in the pictures is not included in the scope of delivery and sale
Technical data:
Table working area length (left-right): 1300 mm
Depth (front-rear): 550 mm
Movement of the table to the right/left (X-axis): 1050 mm
Forward and backward movement of the slide (Y-axis): 510 mm
Z-axis: 510 mm
Distance from spindle head to table surface: min. 150 mm, max. 660 mm
Distance from spindle center to front of stand: 576 mm
Max. Load capacity of the table (evenly distributed): 11772 N (1200 kgf)
Spindle:
Spindle head: 7/24 taper number 40
Spindle speed: 40 - 12000 rpm
Feed speed:
Rapid traverse speed: 36000 mm/min
Cutting feed speed: 1 - 8000 mm/min
T-slot:
Nominal dimensions (ISO R299): 18 mm
Number of grooves: 5
Distance between the grooves: 100 mm
Tool holder capacity: 30
Tool shank type: MAS BT-40
Max. Tool diameter: 80 mm
Without adjacent tools: 125 mm
Max. Tool weight (including pull stud and tool shank): 78.5 N (8 kgf)
Max. Total weight of the tools in the magazine: 1177.2 N (120 kgf)
Max. Tool length (from measuring line): 350 mm
For further technical data see pictures
With technical data as shown in the pictures Afișează traducerea
Consultanță la fața locului de la experți în domeniu
Organizarea transportului în caz de nevoie
Asistență la întocmirea documentației și la vămuire
Condiții de licitare
Oferta dvs. este de €.
Țineți cont că orice ofertă are caracter obligatoriu.
+ costuri de licitație și TVA
Costul suplimentar este reprezentat de comisionul de vânzare, care este acoperit de către cumpărător. Acest cost va fi de 18 % din preț plus TVA.
error
error
Conectează-te
Ai uitat parola?
Surplex folosește cookie-uri pentru a vă oferi cea mai bună experiență de utilizare pe site-ul web. Dacă acceptați cookie-urile vă putem furniza conținut web relevant și ne putem îmbunătăți permanent serviciile. Găsiți mai multe informații în Politica de protecție a datelor.
Folosim cookie-uri necesare din punct de vedere tehnic pentru a putea pune la dispoziție site-ul web. Astfel puteți utiliza funcții importante ale site-ului. Puteți ajusta mai jos toate celelalte cookie-uri în funcție de nevoile dvs.
Folosim cookie-uri de analiză pentru a înțelege modul dvs. de utilizare a site-ului nostru și pentru a îmbunătăți conținutul web și experiența utilizatorului.
Activați utilizarea cookie-urilor pentru a îmbunătăți relevanța reclamelor de pe alte site-uri web. Dacă nu sunteți de acord cu aceasta, este posibil să vedeți reclame mai puțin relevante.
Cookie-urile pentru rețelele sociale ajută la conectarea activităților dvs. de pe paginile noastre de internet cu profilurile dvs. de pe rețelele sociale. Astfel vă putem arăta un conținut relevant pe diferite platforme ale rețelelor sociale.
Folosim cookie-uri pentru personalizarea conținutului web. În acest sens îmbinăm anonimizat datele clienților cu date web, pentru a ne adapta conținutul în mod individual în funcție de nevoile dvs.
Trebuie să permiteți utilizarea cookie-urilor în browserul dvs., pentru a putea utiliza întreaga funcționalitate a paginii de internet.