ARTECH ERGHO 7 Kanlistmaskin

• Edgebander
• Serial number 44204
• Total installed power 14.70 kW
• Edge thickness in strips from 0.40 mm up to 15 mm
• Edge thickness in roll from 0.40 mm up to 3 mm
• Worpiece thickness from 10 mm up to 45 mm
• Minimum workpiece lenght 150 mm
• Minimum workpiece width 50 mm
• Adjustable feed speed
• Feed motor 3 kW
• Control
• CB-700 edge feeder for strips and roll, edge magazine for one edge coil
• VC-700 gluing unit with pot for granulated hot melt adhesive
• Pressure group with (1+3) rollers
• IN-701 end trimming unit, 2 x motor 0.50 kW-12000 rpm, tilting up to 15°
• RS-700 rough trimming unit, 2 x motor 0.80 kW-12000 rpm
• RI-700 fine trimming unit, 2 x motor 0.35 kW-12000 rpm, tilting
• CR-200 profile trimming unit, 2 x motor 0.35 kW-12000 rpm
• RB-700 profile scraping unit
• Flat scraping unit
• SP-700 edge buffing unit Visa översättning