HOMAG KAL 210/6/A20/S2 Single Sided Kanlistmaskins

Assembled and inspectable machine in operation at Ferwood warehouses

Type of edging Thin edge Thick edge Solid wood
Gluing System EVA Hotmelt
Premilling Unit yes
Corner Rounding Unit yes
Max feed speed 25 m/min
Maximum panel thickness 60 mm
Operating Units 8 nr
Min. panel height 12 mm
Max. panel height 60 mm
Min. panel width 60 mm
Min. edge thickness 0.3 mm
Max. edge thickness 20 mm
Max. forward feed speed 25 m/min
Top pressure yes
Pressure with rubber belt
Panel support guides yes
with positioning by NC yes
Infeed panel alignment system yes
No. Panel Sizing / Milling units 1
NO. PANEL SIZING / MILLING UNITS 1
Unit : pre-milling unit
automatic timed intervention : yes
motor power : 3 KW
r.p.m. : 9000 RPM
Edge coil magazine yes
no. positions 2
Gluing system yes
glue pot for EVA hot melt glue yes
premelter for EVA hot melt glue yes
Roller set to press the edge yes
no. pressure roller 7
with positioning by NC yes
No. Edge Processing Units 6
NO. EDGE PROCESSING UNITS 1
Processing Unit : end trimming
Constructor model : HL 84
no. motors : 2
motor power : 0.8 KW
r.p.m. : 12000 RPM
NO. EDGE PROCESSING UNITS 2
Processing Unit : top and bottom rough trimming
Constructor model : FF 12
no. motors : 2
motor power : 1.5 KW
r.p.m. : 12000 RPM
NO. EDGE PROCESSING UNITS 3
Processing Unit : Corner rounding
Constructor model : FK 11
no. motors : 2
motor power : 0.8 KW
r.p.m. : 12000 RPM
NO. EDGE PROCESSING UNITS 4
Processing Unit : edge scraping
NO. EDGE PROCESSING UNITS 5
Processing Unit : glue scraping
NO. EDGE PROCESSING UNITS 6
Processing Unit : buffing
no. motors : 2
motor power : 0.18 KW
r.p.m. : 1800 RPM
Spray unit yes
Control system PC22
Safety standard CE mark yes Visa översättning