Machine number: 158590
Year of construction: unknown
Machine was purchased in 2014 as a demonstration machine
Control system: FANUC SERIES 0i-MB
Incl. machine vice (jaw width: approx. 105 mm), a three-jaw chuck (diameter: approx. 125 mm) and an indexable three-jaw chuck (diameter: approx. 140 mm) (dividing head)
Technical data:
Operating hours approx. 4111, see picture
Table dimensions: 770 x 300 mm
T-slots: 16 x 3 x 80 mm
Max. Table load: 120 kg
Travel distances:
X/Y/Z: 450/350/400 mm
Distance from spindle nose to table surface: from 120 - approx. 520 mm
Feed rate:
Rapid traverse X/Y/Z: 30/30/30 m/min
Cutting feed X/Y/Z: 10 m/min
Spindle speed: 15000 rpm
Spindle holder: BT 30
Max. Tool diameter: 60 mm
Max. Tool length: 100 mm
Max. Tool weight: 2 kg
For further technical data see photographed data sheet
With technical documentation as shown in the pictures
Notes: The tool holders installed in the turret are not included in the scope of delivery
The operating hours can still increase slightly.
The operating hours may still increase slightly. Visa översättning