Çift Uçlu Profiler CELASCHI TSA 280
Makine ayrıntıları
- İsim
- Çift Uçlu Profiler CELASCHI TSA 280
- Ürün numarası
- 958680
- Üretici
- CELASCHI
- Model / Tip
- TSA 280
- İmalat yılı
- bilinmiyor
- Ürün şu zamandan itibaren uygun
- Immediately
- Ürün durumu
- Yer
-
Portekiz, 4615-047 Freixo de Cima
- Haritada göster
- Bu konumdaki tüm ürünler
Maliyetler ve hizmetler
- 2,300.00 €
- Nakliye masrafları
- hariç
- Teslimat şartları
- FCA Freixo de Cima, kamyona yüklendi
- Ödeme şekli
- tahsilattan öncesi %100 ödeme
Teknik ayrıntılar
- Yaklaşık montaj boyutları (UxGxY)
- 5,000 x 5,000 x 1,800 mm
- Yaklaşık ağırlık yakl.
- 5,000 kg
Ürün tanımı
• Double end tenoner
• Total installed power 52 kW
• Maximum working width approx. 3000 mm
• Minimum working width approx. 200 mm
• Maximum workpiece thickness approx. 180 mm
• Machine identically equipped on both sides with 5 aggregates on each side:
1. Scoring unit: depth and height adjustable, motor 0.73 kW, 3000/6000 rpm
2. Hogging unit: depth and height adjustable, motor 4 kW, 3000/6000 rpm
3. Milling aggregate: depth, height, and angle adjustable, motor 4 kW, 3000/6000 rpm
4. Milling aggregate: depth, height, and angle adjustable, motor 4 kW, 3000/6000 rpm
5. Milling aggregate: depth, height, and angle adjustable, motor 4 kW, 3000/6000 rpm
• Adjustable feed speed from 3 m/min up to 24 m/min
• Feed motor 1.47 kW
• Machine opening motor power 0.37 kW
• Frequency converter 50 to 100 Hz with power 23 kVA
• Separated electrical control cabinet
• Total installed power 52 kW
• Maximum working width approx. 3000 mm
• Minimum working width approx. 200 mm
• Maximum workpiece thickness approx. 180 mm
• Machine identically equipped on both sides with 5 aggregates on each side:
1. Scoring unit: depth and height adjustable, motor 0.73 kW, 3000/6000 rpm
2. Hogging unit: depth and height adjustable, motor 4 kW, 3000/6000 rpm
3. Milling aggregate: depth, height, and angle adjustable, motor 4 kW, 3000/6000 rpm
4. Milling aggregate: depth, height, and angle adjustable, motor 4 kW, 3000/6000 rpm
5. Milling aggregate: depth, height, and angle adjustable, motor 4 kW, 3000/6000 rpm
• Adjustable feed speed from 3 m/min up to 24 m/min
• Feed motor 1.47 kW
• Machine opening motor power 0.37 kW
• Frequency converter 50 to 100 Hz with power 23 kVA
• Separated electrical control cabinet
Otomatik çeviri
Direct Sale
Pedro Carriço
1 izleyici
1
İzleyici
İstek üzerine
Fiyat
Pedro Carriço
Hizmetlerimiz
- Demontaj ve yeniden montaj hizmeti
- Dünya çapında lojistik ağı
- Bireysel danışmaconta
- Belgeler ve gümrük işlemleri ile destek