Kenar Bantlama Makinesi IMA Combima System

Very well maintained and no repair backlog IMA Combima System edge banding machine, one-sided U-shaped. The transport chains were completely overhauled in 2021 including new chain plates. The glue application was replaced with Quickmelt and the KFA units were completely overhauled.

Technical data:
- Workpiece length max. 2400 mm
- Workpiece thickness 13 - 40 mm
- Edge material 0.3 - 3 mm
- Feed max. approx. 30 m/min
- Feed roller conveyor with rotating cone

Data for first IMA edge:
IMA Combima-Systems/II/R75/1280:2 30/3:1/R3
Year of manufacture 2007, machine no. 14246

- Infeed
- Format processing right side
  Double cutting for longitudinal and transverse processing
  1 motor approx. 4.4 kW
  2 motors approx. 6.6 kW
- Profile milling and grooving unit right side
- Format processing left side
  Double cutting for longitudinal and transverse processing
  1 motor approx. 4.4 kW
  2 motors approx. 6.6 kW
- Release agent supply top/bottom
- Quickmelt gluing unit
- 36-fold edge magazine with automatic material feed
- Servo trimming unit (2 x 200 W)
- Flush milling unit (2 x 1000 W)
- Profile milling unit (2 x 660 W)
- Form milling unit KFA
- Profile scraper
- Flat scraper
- Buffing
- Standard milling unit for grooving/rabbeting and profiling

Workpiece transfer system with conveyor belts and transfer stations

Data second IMA edge:
IMA Combima-Systems/II/R75/1110:170/3:1/R3
Year of manufacture 2007, machine number 14247

- Infeed
- Format processing
  Double cutting for longitudinal and transverse processing
  1 motor approx. 4.4 kW
  2 motors approx. 6.6 kW
- Release agent supply top/bottom
- Quickmelt gluing unit
- 36-fold edge magazine with automatic material feed
- Servo trimming unit (2 x 200 W)
- Flush milling unit (2 x 1000 W)
- Profile milling unit (2 x 660 W)
- Form milling unit KFA
- Profile scraper
- Flat scraper
- Buffing
- Standard milling unit for grooving/rabbeting and profiling Çeviriyi göster