Centro de torneado y fresado CNC NAKAMURA WT-150II

Capacity

• Swing over bed 190mm
• Swing over saddles 190mm
• Maximum turning diameter 190mm
• Maximum turning length 515 mm
• Maximum bar size 65mm diameter

• Spindle nose A2-6
• Drawtube bore diameter 66mm
• Spindle power 15kW
• Spindle speed 4500 rpm
• Index angle (C axis) 0.001 degree

• Spindle nose A2-5
• Drawtube bore diameter 52mm
• Spindle power 11kW
• Spindle speed 5000 rpm
• Index angle (C axis) 0.001 degree

• Type Base tool holder
• Number of stations 12
• Number of turret index positions 24
• OD tool size 20mm square
• Boring bar size 25/32mm diameter
• Rotary tool power 5.5 kW
• Rotary tool speed 6000rpm

• X axis (Top turret) 167mm
• X axis (Bottom turret) 167mm
• Z axis (Top turret / Bottom turret) 515mm
• Y axis (Top turret) +/- 35mm

• X axis (Top turret / Bottom turret) 20000mm / min
• Z axis (Top turret / Bottom turret) 40000mm / min
• Y axis (Top turret) 6000mm / min
• RH Spindle 40000mm / min
• C axis (Left/Right hand spindles) 6000rpm

• Left hand / right hand spindle synchronization
• Rigid tapping (Top and bottom turret)
• Barfeed interface
• NT 3D Collision Guard
• Nakamura Torque Navigator workpiece datuming system
• NT Nurse System 2 including :-

           - Tool load monitor

           - Tool counter

           - Tool life function

           - Quick offset input function

• Soft work push by sub spindle
• Part off detect
• Operation condition monitor
• Turret collision detection
• Air blast during machining
• Fully Enclosed Splash Guards
• Automatic lubrication unit
• Lighting
• RJ45 socket (Ethernet)

ADDITIONAL FANUC CNC OPTIONS INCLUDED

• Windows Based PC embedded on Control
• USB Connectivity
• Manual guide programming - conversational
• Part program storage length 640m
• Expanded part program editing
• Graphic function
• Tool compensation data 99 pairs
• Custom macro B
• Direct drawing dimension programming
• Inch/Metric switching
• Balance cut G68,G69
• Synchronization / mix control
• Polar coordinate interpolation G12.1 / G13.1
• Cylindrical interpolation G07.1
• G32 thread cutting cycle
• Thread cutting retract
• Multiple repetitive cycles type 1.11 G70 - G76
• Canned cycles G90 - G94
• Canned cycles for drilling G80 - G89
• Co-ordinate system setting G52 - G59
• 125 registered programs for UT / LT
• Background editing
• Look ahead control G08
• Programmable data input G10
• Display of run hour and parts count
• Linear accel/deceleration after cutting feed interpolation

ADDITIONAL MACHINE OPTIONS INCLUDED

• Air Blow Over Left & Right Spindles
• Air and Coolant Blow Through the RH Spindle
• Coolant Level Float Switch
• Helical Interpolation
• Auto Power Off
• Manual Handle Retrace
• Handy Tool Tray
• Parts Un-loader System G Right Side with Parts Conveyor
• Parts Catcher A with stocker for Bar Ends
• Renishaw Manual Detachable Toolsetter
• Barfeed Interface
• 3 Colour Light Stack (Green / Amber / Red)
• 8 sets of extra M Codes

Coolant and Swarf Management Package

• MH500 Swarf Conveyor for mixed swarf
• 0.35 cu m swarf bin
• Twin 20 bar pump kit – complete with hoses, fittings & electrical connectors – filtration to 20 micron

Workholding Package

• 1 off Kitagawa 8" 3 Chuck - A2-6 - Connector - 1 set of Soft Top Jaws
• 1 off Kitagawa 8" 3 Chuck (52mm through hole) -A2-5- Connector - 1 set of Soft Top Jaws
• 8 off Boring Bar Holder 25mm (Includes Sealing Plug) 75mm ctr Ht
• 2 off Boring Bar Holder 32mm (Includes Sealing Plug) 75mm ctr Ht
• 8 off Single Radial Static Holder (Turning) 20mm SQ - RH/LH
• 4 off Double Radial Static Holder (1/2 Index Turning) 20mm SQ
• 1 off Part Off Holder
• 6 off Axial (Face Mill) Driven Holder - ER25 - Internal Coolant
• 6 off Radial (Cross/Mill) Driven Holder - ER25 - Internal Coolant
• RoboJob Loading Robot + Auto door + Interface + Light Guard

PLEASE NOTE ALL TOOL HOLDERS INCLUDED BUT NOT THE TOOLS