Cortadora láser combinada ADIGE LT9 COMBO

The LT9 COMBO is a combined machine designed for laser cutting both sheets and tubes of various shapes including round, square, rectangular, and other closed and open sections made of iron or steel (both mild and alloyed). The machine's structure allows for automatic switching between sheet and tube processing in a short time.

• Sheet Processing: The machine uses a table changer that allows for loading a new sheet during the processing phase. This table changer is supplied by a loading/unloading system called Ragno, which interfaces with a single-tower storage system (HIVE) that stores both processed and unprocessed sheets.
• Tube Processing: The machine is fed via a loader that acts as a buffer for incoming tubes.

• Tube Processing: Finished pieces are unloaded into a designated collection box or cradle.
• Sheet Processing: Unloading is done via a chain conveyor or the unused table during the processing phase. The empty table used for unloading will then be used for loading the new sheet. The two tables of the pallet changer are alternately loaded/unloaded by the Ragno system, interfacing with the single-tower storage system (HIVE) which places them on the pre-defined tray.

• 9080020004 - LASERTUBE LT9 COMBO System
• 9129000802 - Hyfra Pedia SVK 540 Chiller
• 9129001194 - Rofin Sinar DC035 Laser
• 9135010250 - Modular Loader (L=6000)
• 9135010252 - Loader Extension (L=8000)
• 9135000400 - High Pressure Fume Extractor
• 9135000525 - 5” Focal Lens for Motorized Head AK-M
• 9135000535 - 7.5” Focal Lens for Motorized Head AK-M
• 9135010720 - Kit for Open Profiles L=6500
• 9175001800 - Part Viewer
• 9175010991 - Remote Diagnosis Host
• 9180000060 - Finished Tube Piece Lifter
• 9180000061 - Lifter Extension L=9500
• 9180000071 - LT9 - Short Piece Transversal Conveyor
• 9180000091 - LT9 - Additional Unloading L=9500
• 9180000100 - LT9 - Collector Extension L=6500
• 9180000101 - LT9 - Collector Extension L=9500
• 9180000124 - Automatic Pallet Changer (RAGNO)
• 9180000180 - Booster Process Sensor
• 9180000235 - Rear Loading/Unloading Ragno
• 9180000515 - Sensorized Motorized Head
• 9180920004 - LT9 COMBO CO2 Integration
• 9180920014 - LT9 COMBO CO2 Integration
• AC0570 - HIVE Single-Tower Storage System

• Processing Unit: 19,000 kg
• Cabin: 2,000 kg
• Short Piece and Scrap Conveyor: 890 kg
• Lifter: 2,385 kg
• Lifter Extension: 890 kg
• Automatic Tube Loader: 4,200 kg
• Pallet Changer 3000 x 1500: 2,500 kg
• Tube Collector: 800 kg
• Laser Electrical Cabinet: 570 kg
• Additional Unloading: 320 kg
• Additional Unloading Shield: 300 kg
• CNC Console: 150 kg
• Laser Source Support Bench: 450 kg
• Laser Console: 900 kg
• Electrical Cabinet: 400 kg
• Fume Filter: 900 kg
• Rofin Sinar Laser: 550 kg
• HYFRA PEDIA SVK 540 Chiller: 520 kg
• Fume Extractor: 900 kg
• Ragno (HIVE Tower): 8,000 kg
• Mobile Shuttle: 950 kg

The machine comes with a CE compliance certification, which can be viewed upon request.

For further details, please refer to the complete technical documentation (divided into four independently downloadable parts) attached to the article. A graphic layout of the current system configuration is also included.

Note: The total weight varies based on the configuration of subsystems (approximately listed in the description). Refer to table 3-1 in chapter 3 of the manual for individual element weights.

Dimensions: The overall dimensions vary based on subsystem configuration. Refer to figure 3-22 in chapter 3 for the actual dimensions of the system and individual elements.

For further clarification, please contact the project manager in charge.