Equipo para otros sectores SCANTECH XT 30
Lote destacado
lote núm. 806
9.500 €
1 seguidor
Iniciar sesión para pujar
€
Establecer el agente de pujas
+ comisión al comprador e IVA
21/01/2025 14:04
Cierre
9.500 €
Precio de salida
Detalles del artículo
- Denominación
- Equipo para otros sectores SCANTECH XT 30
- Número de artículo
- 980017
- Fabricante
- SCANTECH
- Modelo/Tipo
- XT 30
- Documentos
- 6U_Server_Rack_layout.pdf GENERAL_LAYOUT_ULO3-2500.pdf Bahnriss_Schluesselschalter.pdf CE_Declaration_of_conformity_de_STDE190001.pdf Flexscan_userguide_V2.2.1_de.pdf opc-ua_export_v1.0.pdf serverrack_datasheet.pdf ST00025-Installation_Guide_ULO3_rev_1.2_de.pdf ST00033-ULO3_Maintenance_Manual_rev_1.0_de.pdf ULO3_Electrical_drawing_A.9.pdf
- Año de fabricación
- 2020
- Disponibilidad
- immediately
- Estado
- Lugar
-
Alemania, 79379 Müllheim i.M.
- Mostrar en el mapa
- Todos los artículos de esta ubicación
Gastos y beneficios
- 19 %
- 500,00 €
- Precio total
- IVA no incluido
- Gastos de transporte
- no incluidos
- Condiciones de entrega
- FCA Müllheim i.M., cargado en camión
- Condiciones de pago
- 100% previo cobro
Detalles técnicos
- Dimensiones en planta aprox. (l x w x h)
- 3.212 x 290 x 892 mm
- Peso aprox.
- 400 kg
Descripción
Measuring device for determining the thickness of flowing goods - measuring head traverses across the web.
The system is configured so that the web width (knife position) is read in via sensors. Further signals for process control can be transferred via the I/O box.
Settings for PVC film in the calendering process with thicknesses of 60µm - 1000µm, but can also be used for other materials.
The specific application should be clarified with the manufacturer Scantech, as well as support during commissioning of the system.
Scanner
The parts could also be used individually as spare parts storage.
The system must be approved by the authorities, and an independent inspection must also be carried out by an X-ray expert before official commissioning.
One (or two) employees must be trained as radiation protection officers in accordance with specialist knowledge R3 (within Germany).
The system is configured so that the web width (knife position) is read in via sensors. Further signals for process control can be transferred via the I/O box.
Settings for PVC film in the calendering process with thicknesses of 60µm - 1000µm, but can also be used for other materials.
The specific application should be clarified with the manufacturer Scantech, as well as support during commissioning of the system.
- Thickness gauge ULO3-2500, orientation Left-B
- Flexscan 6 software
- Operator interface
- Server rack with replacement server and UPS
- Communication interface OPC-UA
- Supply voltage: 230V +/- 10%, 50Hz +/- 1%, 20 A, loadable neutral conductor
- Electrical design: in accordance with VDE 100 with declaration of incorporation
- Documentation: 2 x paper
- Documentation language: 2 x German
- Material: PVC foil
- Thickness: 50µm to 1000µm
- Web width: Max. 2100mm
- Web speed: max. 200 m/min
- Line type: PVC calender
- Product tolerance: +/- 5% at 60µm, +/- 3µm
- Measuring accuracy: +/- 0.3µm at 60µm
- Temperatures:
- Measuring point, sensor: < 45°C
- Operating station: < 45°C
Scanner
- Measuring frame ULO3 - 2500 mm
- X-Ray sensor greater than 5keV acceleration voltage, max. 15keV
- DELL PC (without mouse, screen and keyboard)
- 1 EATON UPS for bridging power failures
- 2 server PCs to be able to continue using the other in the event of a failure
- 1 switch
- 4x analog input (2x for your measurement position (4-20mA or 0-10V))
- 4x Analog Output (statistical variables or mean values can be transmitted here via analog signal) (4-20mA or 0-10V)
- 8x digital input (e.g. buttons that trigger actions on the scanner can be connected here. E.g. Start Scan, Stop Scan...)
- 4x digital output (e.g. to control a lamp / horn if, for example, the average value is outside a tolerance)
- 1x rotary encoder (necessary for operation)
- 3x draw-wire sensor for transferring the material width (optional)
- 1x key/switch for bypassing a barrier sensor for maintenance purposes
The parts could also be used individually as spare parts storage.
The system must be approved by the authorities, and an independent inspection must also be carried out by an X-ray expert before official commissioning.
One (or two) employees must be trained as radiation protection officers in accordance with specialist knowledge R3 (within Germany).
Traducción automática
Detalles de la subasta
- lote núm.
- 806
- Documentos
- Términos especiales de la subasta
- Inspección
-
La ubicación precisa de los artículos está disponible bajo pedido.
Los artículos se encuentran en varias ubicaciones (ver las descripciones de los artículos). ¡Inspección bajo cita previa!
Leon Quentin Project Manager
Nuestros servicios
- Servicio personalizado en 16 idiomas
- Asesoramiento presencial y por expertos
- Organización del transporte bajo petición
- Ayuda con la documentación y los trámites aduaneros