HOMAG Formfräsaggregat FF12unten/oben WD70 linksgebraucht

Used profile trimming unit from Homag, type WD 70, with the following equipment: for cross processing of postforming softforming parts and rounding of plastic edges on the front and rear edge of the workpiece at the top and bottom. - prepared for mounting the processing motors - edge thickness max. 6mm - workpiece thickness max. 70mm with processing max. 80mm without processing - workpiece length min. 120mm single-sided min. 80mm double-sided - feed rate max. 20m/min - workpiece gap approx. 500mm - without overtravel control - space requirement: 1450mm Note: - incl. 4x change and adjustment device for radius and chamfer milling with combination tool 4 motors each 0.4kW, 200Hz, 12000 1/min - incl. 2x automatic adjustment via axis for rear edge top and front edge bottom, 1x adjustment via counter for rear edge bottom - incl. pneumatic adjustment form milling FF12 for electro-pneumatic lateral movement out of the working area Mostrar traducción