HOMAG HL81 Kappaggregat Fase/Gerade 0,22kW links

Used snipping unit HL81, with the following equipment: for snipping the edge protrusions on the front and rear edge - pulling snipping stop - 2 motors each 0.22kW, 200Hz, 12000 1/min - pneumatic adjustment for converting from chamfer to straight snipping - incl. saw blade holder HSK25, without saw blades - workpiece protrusion min. 30mm - edge thickness straight max. 6mm - edge thickness chamfer max. 3mm - chamfer 30 degrees - workpiece thickness max. 60mm - edge width 65mm - edge cross-section max. 270mm² - feed speed: - up to workpiece thickness 40mm max. 25m/min - up to workpiece thickness 60mm max. 20m/min with panel thickness 19mm - workpiece gap at 20m/min. min. = 600mm - workpiece sequence VK/VK 1000mm at 25m/min 1000mm - space requirement: 1100mm Mostrar traducción