Centro di fresatura a 5 assi REICHENBACHER VISION I SPR

• serial number 1719

 

• NC axes X-axis
• movement of the bridge portal on the bed 3740 mm
• longitudinal movement:
• Y-axis movement of the cross slide on the portal 1600 mm
• transverse movement:
• Z-axis movement of the vertical slide in the portal 480 m
• vertical movement;
• numerically controlled rotary movement
• B-axis 45° to the X/Y plane, +/- 180°
• rotary movement of the cardanic working head
• C-axis in the X-/Y-plane +/- 360°
• rotary movement around the C-axis
• positioning axis on the tool changer +/- 360°
• rotary movement of the tool magazine

 

• feed speeds X-/Y-plane
  • axis speed max. 60 m/min
  • path speed max. 85 m/min
  • C-axis max. 20 m/min
  • B-axis max. 180°/s
  • C-axis max. 90°/ s

 

• central lubrication system grease reserve approx. 3 l
• filling level control = visual control
• lubrication setting
• monitoring = visual control
• operating pressure = 30 bar
• flow rate = 0.2 l/min
• quantity of lubricant = approx. 3.6 m³/lubrication cycle
• lubrication interval 8 h
• rated power 15 kW at 24000 rpm
• power constant in the speed range 12000 to 24000 rpm

 

• power below 12000 rpm proportional to the speed 1500 to 24000 rpm can be preselected via the control in steps of 300 rpm,
• right-left rotation can be preselected via the program, when switching off the Spindle brakes automatically
• HF spindle drive with power supply from frequency converter
• water cooling with cooling unit
• sealing air on the working side of the spindle prevents dirt particles from penetrating into the spindle
• permanent grease lubrication, no further lubrication required during the service life
• tool holder hollow taper shank HSK 63,
• vertical distance between machine table and spindle nose 80 mm,
• minimum distance +480 mm
• C-hub = 560 mm maximum distance,
• tool length max. 285 mm 
• tool diameter max. 200 mm
• tool mass max. 6 kg
• recommended tool dimensions = end mill N = 18000 rpm
• diameter 24 mm
• cutting length = 50 mm
• profile milling cutter N = 12000 rpm
• diameter 100 mm
• cutting length 50 mm
• mass 1000 g
• geometry distance of intersection B/C axis to the front edge mount 83 mm
• working range = +/- 360°
• multiple rotations possible
• speed = max. 90°/ s

Drive Additional units are turned by an integrated servo motor and the two-stage spur gear in the X and Y planes, left and right turning possible, tool changer, number of tool stations 12, tool grippers spring-loaded gripper grippers, center distance of the tools on the magazine plate 125 mm, flight circle for additional heads max 300 mm, it may not be possible to occupy neighboring locations, maximum tool length 285 mm from the flat surface of the tool holder, tool diameter corresponding to the available space 200 mm, maximum tool weight 6 kg for a single tool location, maximum 50 kg for the entire tool magazine, extraction air throughput = approx. 5300, air speed approx. 30 m/s, negative pressure in the intake connection approx. 1500 Pa, connection 400 mm diameter at a height of approx. 2200 mm, grid table support material laminated wood (solid wood), support thickness = 30 mm, table size 3800 x 1500 mm, grid size 30 x 30 mm, with grooves 8 x 6 mm, working areas with single loading max. 3740 x 1600 mm, with free loading area of ​​approx. 2800 x 1600 mm, with alternating loading 2 x approx. 1500 x 1600 mm, Vacuum pump suction capacity 250 m³/h, max. vacuum = 95% corresponds to 0.05 bar absolute, working range = -0.95 to 0.55 bar, monitoring switch-off pressure = -0.55 bar, switch-on pressure = -0.75 bar, Pressure tank 500 l, CNC control SIEMENS type SINUMERIK 840 D, with central unit NCU 573.2 and software module MMC 103, software module MMC 103, equipment INTEL PENTIUM CPU, 64 MB RAM memory, 200 MB hard disk for application software NC program and data, system software Version 4.3 for Windows 9 x and Windows NT 4, CNC functionality, acceleration with pressure limitation, frame concept, continuous-path mode with programmed rounding distance, spindle function-oriented spindle stop, spindle speed monitoring, min. and max. limit values, axis monitoring, constant cutting speed, working area limitation, limit switch monitoring, software and hardware limit switches, 2D /3D protection areas, contour monitoring, position monitoring, standstill monitoring, jamming monitoring, safety function axis limitation from the PLC, spindle speed limitation, connections current type = 400 V, 3 phases, voltage tolerance +6% / -10%, mains connection without residual current, circuit breaker FI, main connection connected load max. 32 kW, 96 A, main fuse 3 x 100 A, compressed air requirement 150 to 250 l/min, overall dimensions required floor space 6400 x 3000 mm, without control cabinet and vacuum pump, required floor space 5800 x 1400 mm without control cabinet and vacuum pump, required height 2400 kg Mostra traduzione