DMT-KERN CD 322 Cycle lathe

Machine number: 2404.09
Operating voltage: 400 V
Frequency: 50 Hz
Rated current: 38 A
Control: HEIDENHAIN MANUAL PLUS 620
Rotation diameter over bed: 320 mm
Rotation diameter above the cross slide: 150 mm
Slide path plan: 200 mm
Center width: 1000 mm
Spindle diameter in the front bearing: 100 mm
Speed range: 1 - 3000 rpm
Cross slide:
Feed range flat: 0.001 - 1000 mm/rev
Feed range longitudinal and thread pitches: 0.001 - 2000 mm/rev
Rapid traverse planar: 5 m/min
Rapid traverse lengthwise: 10 m/min
Quill diameter: 60 mm
Quill stroke: 140 mm
Pick-up taper: MK 4
The machine is equipped with a tailstock as well as an 8-position tool turret and a three-jaw chuck from the manufacturer RÖHM
Diameter: 200 mm Mostra traduzione